Keyword: electron
Paper Title Other Keywords Page
MOA01 Riding the FEL Instability (Dedicated to Alberto Renieri) laser, storage-ring, free-electron-laser, radiation 1
 
  • G. Dattoli
    ENEA C.R. Frascati, Frascati (Roma), Italy
  • M.-E. Couprie
    SOLEIL, Gif-sur-Yvette, France
  • C. Pellegrini
    SLAC, Menlo Park, California, USA
 
  The Free Electron Laser (FEL) operation, like that of any Free Electron source of coherent radiation, is associated with the onset of an instability. The interplay between the FEL and other instabilities, affecting the beam, is one of the interesting aspects of the associated dynamics. It involves issues of practical interest (Renieri Limit in Storage Ring FELs, suppression of instabilities like saw-tooth and synchrotron…). The paper reviews these problems and offers an overview of the scientific contribution of Alberto Renieri to the FEL from this perspective.  
slides icon Slides MOA01 [5.143 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-MOA01  
About • paper received ※ 26 August 2019       paper accepted ※ 09 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOA02 First Lasing of a Free Electron Laser in the Soft X-Ray Spectral Range with Echo Enabled Harmonic Generation FEL, laser, experiment, free-electron-laser 7
 
  • E. Allaria, A. Abrami, L. Badano, M. Bossi, N. Bruchon, F. Capotondi, D. Castronovo, M. Cautero, P. Cinquegrana, M. Coreno, I. Cudin, M.B. Danailov, G. De Ninno, A.A. Demidovich, S. Di Mitri, B. Diviacco, W.M. Fawley, M. Ferianis, L. Foglia, G. Gaio, F. Giacuzzo, L. Giannessi, S. Grulja, F. Iazzourene, G. Kurdi, M. Lonza, N. Mahne, M. Malvestuto, M. Manfredda, C. Masciovecchio, N.S. Mirian, I. Nikolov, G. Penco, E. Principi, L. Raimondi, P. Rebernik Ribič, R. Sauro, C. Scafuri, P. Sigalotti, S. Spampinati, C. Spezzani, L. Sturari, M. Svandrlik, M. Trovò, M. Veronese, D. Vivoda, M. Zaccaria, D. Zangrando, M. Zangrando
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • H.-H. Braun, E. Ferrari, E. Prat, S. Reiche
    PSI, Villigen PSI, Switzerland
  • N. Bruchon
    University of Trieste, Trieste, Italy
  • M. Coreno
    CNR-ISM, Trieste, Italy
  • M.-E. Couprie, A. Ghaith
    SOLEIL, Gif-sur-Yvette, France
  • G. De Ninno
    University of Nova Gorica, Nova Gorica, Slovenia
  • C. Feng
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
  • F. Frassetto, L.P. Poletto
    LUXOR, Padova, Italy
  • D. Garzella
    CEA, Gif-sur-Yvette, France
  • V. Grattoni
    DESY, Hamburg, Germany
  • E. Hemsing
    SLAC, Menlo Park, California, USA
  • P. Miotti
    CNR-IFN, Padova, Italy
  • G. Penn
    LBNL, Berkeley, California, USA
  • M.A. Pop
    MAX IV Laboratory, Lund University, Lund, Sweden
  • E. Roussel
    PhLAM/CERCLA, Villeneuve d’Ascq Cedex, France
  • T. Tanikawa
    EuXFEL, Schenefeld, Germany
  • D. Xiang
    Shanghai Jiao Tong University, Shanghai, People’s Republic of China
 
  We report on the successful operation of a Free Electron Laser (FEL) in the Echo Enabled Harmonic Generation (EEHG) scheme at the FERMI facility at Sincrotrone Trieste. The experiment required a modification of the FEL-2 undulator line which, in normal operation, uses two stages of high-gain harmonic generation separated by a delay line. In addition to a new seed laser, the dispersion in the delay-line was increased, the second stage modulator changed and a new manipulator installed in the delay-line chicane hosting additional diagnostic components. With this modified setup we have demonstrated the first evidence of strong exponential gain in a free electron laser operated in EEHG mode at wavelengths as short as 5 nm.  
slides icon Slides MOA02 [5.133 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-MOA02  
About • paper received ※ 21 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOA03 First Lasing at the CAEP THz FEL Facility FEL, laser, free-electron-laser, high-voltage 11
 
  • P. Li, T.H. He, M. Li, J. Liu, X. Luo, Q. Pan, L.J. Shan, X. Shen, H. Wang, J. Wang, D. Wu, D.X. Xiao, Y. Xu, L.G. Yan, P. Zhang, K. Zhou
    CAEP/IAE, Mianyang, Sichuan, People’s Republic of China
  • Y. Liu
    CAEP/IFP, Mainyang, Sichuan, People’s Republic of China
 
  China Academy of Engineering Physics terahertz free electron laser (CAEP THz FEL, CTFEL) is the first THz FEL user facility in China, which was an oscillator type FEL. This THz FEL facility consists of a GaAs photocathode high-voltage DC gun, a superconducting RF linac, a planar undulator and a quasi-concentric optical resonator. The terahertz laser’s frequency is continuous adjustable from 0.7 THz to 4.2 THz. The average power is more than 10 W and the micro-pulse power is more than 0.3 MW. In this paper, the specific parameters and operation status of CTFEL are presented. Finally, some user experiments are introduced briefly.  
slides icon Slides MOA03 [3.771 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-MOA03  
About • paper received ※ 20 August 2019       paper accepted ※ 18 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOA07 Commissioning and First Lasing of the FELiChEM: A New IR and THz FEL Oscillator in China FEL, cavity, undulator, linac 15
 
  • H.T. Li, Q.K. Jia
    USTC/NSRL, Hefei, Anhui, People’s Republic of China
 
  A new infrared FEL named FELiChEM aiming at the energy chemistry has been constructed and commissioned at NSRL in Hefei. It consists of two FEL oscillators driven by one normal-conducting S-Band linac with maximum beam energy of 60 MeV. The two oscillators generate the midinfrared and far-infrared lasers covering the spectral range of 2.5-50 µm and 40-200 µm, respectively. First lasing was achieved at a wavelength of 15 µm with an electron energy of 35 MeV. Till now, we have observed the FEL signal from 3.5 µm to 30 µm and achieved the maximum micropulse energy up to 27 µJ at 15 µm.  
slides icon Slides MOA07 [2.434 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-MOA07  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOC01 Regenerative Amplifier FEL - from IR to X-Rays FEL, cavity, undulator, feedback 20
 
  • D.C. Nguyen, P.M. Anisimov, C.E. Buechler, Q.R. Marksteiner, R.L. Sheffield
    LANL, Los Alamos, New Mexico, USA
 
  The Regenerative Amplifier FEL (RAFEL) feeds back a small fraction of the radiation exiting a high-gain undulator as the seed for the next pass, and achieves narrow linewidth and saturation in a few passes. For the IR RAFEL, we used an optical cavity with annular mirrors to reinject ~10% of the IR radiation back into a two-meter undulator [1]. Since then, a number of researchers have proposed RAFEL and XFELO to achieve full temporal coherence in VUV and X-ray FELs [2-5]. For the XFELO, symmetric Bragg backscattering off high-quality diamond crystals can provide very high reflectivity for the XFELO cavity [6]. The required reflectivity for a RAFEL feedback cavity is much lower than the XFELO. We show that 6% feedback is sufficient for the X-ray RAFEL at 9.8 keV to saturate and achieve 0.5-eV bandwidth. We discuss options to out-couple more than ~50% of the RAFEL intra-cavity power and discuss challenges associated with X-ray absorption in the out-coupler.
[1] D. Nguyen et al. NIMA 429 125 (1999)
[2] B. Faatz et al. NIMA A429 424 (1999)
[3] Z. Huang et al. PRL 96 144801 (2006)
[4] B.W.J. McNeil et al. NJP 9 239 (2007)
[5] G. Marcus et al. FEL17 MOP061 (2017)
[6] K. Kim et al. PRL 100 244802 (2008)
 
slides icon Slides MOC01 [1.260 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-MOC01  
About • paper received ※ 21 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUA01 Parallel Operation of SASE1 and SASE3 at the European XFEL FEL, background, operation, undulator 25
 
  • S. Liu, F. Brinker, W. Decking, L. Fröhlich, R. Kammering, D. Nölle, F. Obier, E. Schneidmiller, M. Scholz, T. Wilksen, M.V. Yurkov
    DESY, Hamburg, Germany
  • R. Boll, N. Gerasimova, T. Mazza, M. Meyer, A. Scherz, H. Sinn
    EuXFEL, Schenefeld, Germany
 
  At the European XFEL a hard X-Ray SASE FEL (SA-SE1) and a soft X-Ray SASE FEL (SASE3) share in series the same electron beamline. This configuration couples the operation conditions for both undulators and their subsequent user experiments in terms of SASE in-tensity and background. We report on our experience in parallel operation and discuss the solutions that enable the operation of both undulators as independently as possible.  
slides icon Slides TUA01 [13.809 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUA01  
About • paper received ※ 26 August 2019       paper accepted ※ 17 October 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUA04 Harmonic Lasing Experiment at the European XFEL FEL, undulator, laser, free-electron-laser 29
 
  • E. Schneidmiller, F. Brinker, W. Decking, M.W. Guetg, S. Liu, D. Nölle, M. Scholz, M.V. Yurkov, I. Zagorodnov
    DESY, Hamburg, Germany
  • G. Geloni, N. Gerasimova, J. Grünert, S. Karabekyan, N.G. Kujala, J. Laksman, Y. Li, J. Liu, Th. Maltezopoulos, I. Petrov, L. Samoylova, S. Serkez, H. Sinn, F. Wolff-Fabris
    EuXFEL, Schenefeld, Germany
 
  Harmonic lasing is an opportunity to extend the photon energy range of existing and planned X-ray FEL user facilities. Contrary to nonlinear harmonic generation, harmonic lasing can provide a much more intense, stable, and narrow-band FEL beam. Another interesting application is Harmonic Lasing Self-Seeding (HLSS) that allows to improve the longitudinal coherence and spectral power of a Self-Amplified Spontaneous Emission (SASE) FEL. This concept was successfully tested at FLASH in the range of 4.5 - 15 nm and at PAL XFEL at 1 nm. In this contribution we present recent results from the European XFEL where we successfully demonstrated operation of HLSS FEL at 5.9 Angstrom and 2.8 Angstrom, in the latter case obtaining both 3rd and 5th harmonic lasing.  
slides icon Slides TUA04 [1.174 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUA04  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUB01 Echo-Enabled Harmonic Generation Lasing of the FERMI FEL in the Soft X-Ray Spectral Region laser, FEL, free-electron-laser, photon 33
 
  • P. Rebernik Ribič
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • P. Rebernik Ribič
    University of Nova Gorica, Nova Gorica, Slovenia
 
  The layout of the FERMI FEL-2 undulator line, normally operated in the two-stage high-gain harmonic generation (HGHG) configuration, was temporarily modified to allow running the FEL in the echo-enabled harmonic generation (EEHG) mode. The EEHG setup produced stable, intense and nearly fully coherent pulses at wavelengths as short as 5.9 nm (211 eV). Comparing the performance to the two-stage HGHG showed that EEHG gives significantly better spectra in terms of the central wavelength stability and bandwidth, especially at high harmonics, where electron-beam imperfections start to play a significant role. Observation of stable, narrow-band, coherent emission down to 2.6 nm (474 eV) indicates the possibility to extend the lasing region to even shorter wavelengths.  
slides icon Slides TUB01 [10.360 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUB01  
About • paper received ※ 21 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP001 Extension of the PITZ Facility for a Proof-of-Principle Experiment on THz SASE FEL radiation, FEL, undulator, experiment 38
 
  • P. Boonpornprasert, G.Z. Georgiev, G. Koss, M. Krasilnikov, X. Li, F. Mueller, A. Oppelt, S. Philipp, H. Shaker, F. Stephan, T. Weilbach
    DESY Zeuthen, Zeuthen, Germany
  • Z.G. Amirkhanyan
    CANDLE SRI, Yerevan, Armenia
 
  The Photo Injector Test Facility at DESY in Zeuthen (PITZ) has been proposed as a suitable facility for research and development of an accelerator-based THz source prototype for pump-probe experiments at the European XFEL. A proof-of-principle experiment to generate THz SASE FEL radiation by using an LCLS-I undulator driven by an electron bunch from the PITZ accelerator has been planned and studied. The undulator is foreseen to be installed downstream from the current PITZ accelerator, and an extension of the accelerator tunnel is necessary. Radiation shielding for the extended tunnel was designed, and construction works are finished. Design of the extended beamline is ongoing, not only for this experiment but also for other possible experiments. Components for the extended beamline, including magnets for beam transport, a chicane bunch compressor, electron beam diagnostics devices, and THz radiation diagnostics devices have been studied. An overview of these works will be presented in this paper.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP001  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP004 A Superradiant THz Undulator Source for XFELs undulator, FEL, radiation, experiment 48
 
  • T. Tanikawa, G. Geloni, S. Karabekyan, S. Serkez
    EuXFEL, Schenefeld, Germany
  • V.B. Asgekar
    University of Pune, Pune, India
  • S. Casalbuoni
    KIT, Eggenstein-Leopoldshafen, Germany
  • M. Gensch
    Technische Universität Berlin, Berlin, Germany
  • M. Gensch
    DLR, Berlin, Germany
  • S. Kovalev
    HZDR, Dresden, Germany
 
  The European XFEL has successfully achieved first lasing in 2017 and meanwhile three SASE FEL beamlines are in operation. An increasing number of users has great interest in a specific type of two-color pump-probe experiments in which high-field THz pulses are employed to drive nonlinear processes and dynamics in matter selectively. Here, we propose to use a 10-period superconducting THz undulator to provide intense, narrowband light pulses tunable in wide range between 3 and 100 THz. The exploitation of superconducting technology allows us to meet the challenge of generating such low photon energy radiation despite the very high electron beam energy at the European XFEL. In this presentation, we will present the latest development concerning THz undulator design and present the expected THz pulse properties for the case of the European XFEL.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP004  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP007 Experience with the Superradiant THz User Facility Driven by a Quasi-CW SRF Accelerator at ELBE detector, radiation, SRF, experiment 56
 
  • M. Bawatna, B.W. Green
    HZDR, Dresden, Germany
 
  Instabilities in beam and bunch parameters, such as bunch charge, beam energy or changes in the phase or amplitude of the accelerating field in the RF cavities can be the source of noise in the various secondary sources driven by the electron beam. Bunch charge fluctuations lead to intensity instabilities in the super-radiant THz sources. The primary electron beam driving the light sources has a maximum energy of 40 MeV and a maximum current of 1.6 mA. Depending on the mode of operation required, there are two available injectors in use at ELBE. The first is the thermionic injector, which is used for regular operating modes and supports repetition rates up to 13 MHz and bunch charges up to 100 pC. The second is the SRF photo-cathode injector, which is used for experiments that may require lower emittance or higher bunch charges of up to 1 nC. It has a maximum repetition rate of 13 MHz, which can be adjusted to lower rates if desired, also including different macro pulse modes of operation. In this contribution, we will present our work in the pulse-resolved intensity measurement that allows for correction of intensity instabilities.  
poster icon Poster TUP007 [0.658 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP007  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP008 Concept of High-Power CW IR-THz Source for the Radiation Source Elbe Upgrade undulator, radiation, FEL, linac 59
 
  • P.E. Evtushenko, T.E. Cowan, U. Lehnert, P. Michel
    HZDR, Dresden, Germany
 
  The Radiation Source ELBE at HZDR is a user facility based on a 1 mA, 40 MeV CW SRF LINAC. HZDR is considering upgrade options for the ELBE or its replacement with a new user facility. A part of the user requirements is the capability to generate IR and THz pulse in the frequency range from 0.1 through 30 THz, with pulse energies in the range from 100 uJ through a few mJ, at the repetition rate between 100 kHz and 1 MHz. In this contribution, we outline key aspects of a concept, which would allow achieving such parameters. Such key aspects are: use of a beam with longitudinal density modulation and bunching factor of about 0.5 at the fundamental frequency; achieving the density modulation through the mechanism similar to the one used in optical klystron (OK) and HGHG FEL, generation necessary for the modulation optical beam by an FEL oscillator, using two electron injectors, where one injector provides a beam for the FEL oscillator while second high charge injector provides beam for the high energy per pulse generation for user experiments. All-in-all the concept of the new radiation source is very similar to an OK, but operating with two beams simultaneously.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP008  
About • paper received ※ 29 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP009 Integration of an XFELO at the European XFEL Facility FEL, radiation, simulation, cavity 62
 
  • P. Rauer, I. Bahns, W. Hillert, J. Roßbach
    University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
  • W. Decking
    DESY, Hamburg, Germany
  • H. Sinn
    EuXFEL, Schenefeld, Germany
 
  Funding: Work supported by BMBF (FKZ 05K16GU4)
An X-ray free-electron laser oscillator (XFELO) is a fourth generation X-ray source promising radiation with full three dimensional coherence, nearly constant pulse to pulse stability and more than an order of magnitude higher peak brilliance compared to SASE FELs. Proposed by Kim et al. in 2008 [1] an XFELO follows the concept of circulating the light in an optical cavity - as known from FEL oscillators in longer wavelength regimes - but uses Bragg reflecting crystals instead of classical mirrors. With the new European X-ray Free-Electron Laser (XFEL) facility recently gone into operation, the realization of an XFELO with radiation in the Angstrom regime seems feasible. Though, the high thermal load of the radiation on the cavity crystals, the high sensibility of the Bragg-reflection on reflection angle and crystal temperature as well as the very demanding tolerances of the at least 60 m long optical resonator path pose challenges which need to be considered. In this work these problems shall be summarized and results regarding the possible integration of an XFELO at the European XFEL facility will be presented.
[1] K.-J. Kim, Y. Shvyd’ko and S. Reiche, Phys. Rev. Lett. 100 (2008), 244802.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP009  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP012 Smith-Purcell Radiation Emitted by Pico-second Electron Bunches from a 30 keV Photo-Electron Gun radiation, experiment, laser, gun 66
 
  • M.R. Asakawa, S. Yamaguchi
    Kansai University, Osaka, Japan
 
  In this paper, an experiment to generate Smith-Purcell radiation using pico-second electron bunches is reported. The electron bunch was produced by a DC 30 keV photo-electron electron gun driven by a 100 fs Ti:sapphire laser. The charge of the bunch varied from 1 pC to 300 pC by changing the laser power. Smith-Purcell radiation experiment was performed with the central part of the entire electron bunch. Estimation of pulsewidth of the bunch based on the envelope equation showed that the pulsewidth of the bunch at the anode electrode increased from 0.8 ps to 3.2 ps as the bunch charge increase from 0.1 pC to 11 pC. Such electron bunch was traveled along the surface of the metallic grating with a period of 2 mm. The radiation wavelength was estimated to be 4 mm at an obserbation angle of 10 degree. The radiation power was measured by a bolometer and quadraticallly increased with the bunch charge. Numerical simulation of this experiment indicated the enhancement of the harmonic components of the radiation. We are now constructing a THz-TDS system to measure the time-trace of the electric field of the radiation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP012  
About • paper received ※ 14 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP015 Design of High-Repetition Terahertz Super-Radiation Based on CAEP THz FEL Superconducting Beamline radiation, FEL, undulator, laser 73
 
  • D. Wu, T.H. He, L.B. Li, M. Li, P. Li, X. Luo, Q. Pan, L.J. Shan, X. Shen, H. Wang, J. Wang, D.X. Xiao, L.G. Yan, P. Zhang, K. Zhou
    CAEP/IAE, Mianyang, Sichuan, People’s Republic of China
 
  China Academy of Engineering Physics terahertz free electron laser (CAEP THz FEL, CTFEL) is the first THz FEL oscillator in China. CTFEL spectrum covers from 0.7 THz to 4.2 THz. However, there are still many applications requiring lower frequency. The super-radiation of the ultra-short electron beam bunches could generate ultra-fast, carrier-envelope-phase-stable, and high-field terahertz. The coherent diffraction/transition radiation (CDR/CTR) and coherent undulator radiation (CUR) can be also synchronized naturally. In this paper, the dynamic and the design of the super-radiation are introduced. The main parameters of the CDR/CTR and CUR are also discussed. A multi-color pump-probe system based on super-radiation is also proposed.
Work supported by National Natural Science Foundation of China with grant (11575264, 11605190 and 11805192), Innovation Foundation of CAEP with grant (CX2019036, CX2019037)
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP015  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP017 Terahertz FEL Simulation in PAL XFEL FEL, simulation, undulator, radiation 77
 
  • J.H. Ko, H.-S. Kang
    PAL, Pohang, Republic of Korea
 
  Terahertz radiation is being used in various fields such as imaging, diagnosis, inspection, etc. For the terahertz research, the Pohang accelerator laboratory (PAL) is planning to make a terahertz free electron laser based on self-amplified spontaneous emission (SASE). Using free electron laser method, we can conduct the THz-pump X-ray probe experiment. For the terahertz free electron laser, we conducted the simulation on accelerators below 40 MeV, using photo-cathode RF gun, S-band accelerator and undulator below 4 meters.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP017  
About • paper received ※ 20 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP018 Superradiant Emission of Electron Bunches Based on Cherenkov Excitation of Surface Waves in 1D and 2D Periodical Lattices: Theory and Experiments GUI, experiment, radiation, simulation 80
 
  • A. Malkin, N.S. Ginzburg, A. Sergeev, I.V. Zheleznov, I.V. Zotova
    IAP/RAS, Nizhny Novgorod, Russia
  • M.I. Yalandin
    RAS/IEP, Ekaterinburg, Russia
  • V.Yu. Zaslavsky
    UNN, Nizhny Novgorod, Russia
 
  Funding: The work was supported by RFBR grant no. 17-08-01072
In recent years, significant progress was achieved in generation of high-power ultrashort microwave pulses based on superradiance (SR) of electron bunches extended in the wavelength scale. In this process, coherent emission from the entire volume of the bunch occurs due to the development of microbunching and slippage of the wave with respect to electrons. An obvious method for generation of high-power sub-THz radiation is the implementation of oversized periodical slow-wave structures where evanescent surface waves can be excited. We report of the experiments on Cherenkov generation of 150 ps SR pulses with a central frequency of 0.14 THz, and an extremely high peak power up to 70 MW. In order to generate spatially coherent radiation in shorter wavelength ranges (including THz band) in strongly oversized waveguiding systems, we propose a slow wave structure with double periodic corrugation (2D SWS). Using the quasi-optical theory and PIC simulations, we demonstrate the applicability of such 2D SWS and its advantages against traditional 1D SWS. Proof of principle experiments on observation G-band Cherenkov SR in 2D SWS are currently in progress.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP018  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP019 Regime of Multi-Stage Non-Resonant Trapping in Free Electron Lasers FEM, FEL, wiggler, experiment 83
 
  • A.V. Savilov, I.V. Bandurkin, Yu.S. Oparina, N.Yu. Peskov
    IAP/RAS, Nizhny Novgorod, Russia
 
  Funding: This work is supported by the RFBR (grants #18-02-40009, #18-02-00765) and by the IAP RAS Project 0035-2019-0001.
We describe three works united by the idea of the non-resonant regime [1] providing an effective trapping in a beam with a great energy spread. In this regime, the "bucket" corresponding to the resonant electron-wave interaction passes through the electron layer on the energy-phase plane and traps a fraction of electrons. (I) Operability of this regime was demonstrated in the high-efficient 0.8 MeV Ka-band FEM-amplifier [2]. (II) In short-wavelength FELs the multi-stage trapping in several consecutive sections can be organized [3]. In each section a small e-beam fraction is trapped due to a weak electron-wave interaction. However, repetition of this process from section to section involves in the interaction almost the whole e-beam. We describe efficiency enhancement and improving the frequency wave spectrum in multi-stage SASE FELs. (III) The multi-stage amplification of a single-frequency wave signal can provide cooling of the electron bunch. In this regime, tapering of every section is provided such that the "bucket" goes from maximal initial electron energy down to the minimal one and moves down energies of trapped electrons.
[1] A.Savilov et al., Nucl. Instr. Meth. A, vol. 507, p.158, 2003
[2] A.Kaminsky et al., Int. Conf. IRMMW-THz 2018, art. 4057938
[3] S.Kuzikov, A.Savilov, Phys. Plasmas, vol. 25, p.113114, 2018
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP019  
About • paper received ※ 14 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP020 Terahertz Free Electron Maser Based on Excitation of a Talbot-Type Super-Mode in an Oversized Microwave System cavity, GUI, resonance, simulation 87
 
  • A.V. Savilov, Yu.S. Oparina, N.Yu. Peskov
    IAP/RAS, Nizhny Novgorod, Russia
 
  Funding: The work is supported by the Russian Science Foundation, Project # 19-12-00212.
A natural problem arising in the case of realization of a THz FEM with a high-current relativistic e-beam is an inevitable use of an oversized microwave system, which characteristic transverse size significantly exceeds the wavelength of the operating wave. In this situation, it becomes difficult to provide selective excitation of a chosen transverse mode of the operating cavity. Our basic idea is to give up working on a fixed transverse mode. Instead, we propose to work on a supermode, which is a fixed set of several transverse modes of an oversized wavegude. We propose to use the Talbot effect [1,2,3] as a way to create an oversized microwave system of an electron maser that provides a high Q-factor for this supermode. On the basis of a multi-mode set of self-consistent equations of the electron-wave interaction we demonstrate the possibility of the selective self-excitation of the supermode both in the simplest 2-D model and in the detailed modeling of a THz FEM fed by a 10 MeV / 2 kA / 200 e-beam based on excitation of a Talbot-type supermode at a frequency close to 2 THz. The calculated efficiency at the level of 5-10% corresponds to the GW level of the output power.
[1] L. A. Rivlin, Laser Focus, p. 82, 1981
[2] G. G. Denisov, D. A. Lukovnikov, M. Yu. Shmelyov, Digest of 18 Int. Conf. on IR MM Waves, p. 485, 1993
[3] V. L. Bratman et al., Nucl. Instr. Meth. Phys. Res. A, vol. 407, pp. 40-44, 1998
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP020  
About • paper received ※ 14 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP021 Development of Powerful Long-Pulse Terahertz Band FELs Based on Linear Induction Accelerators FEL, simulation, radiation, feedback 91
 
  • V.Yu. Zaslavsky, N.S. Ginzburg, A. Malkin, N.Yu. Peskov, A. Sergeev
    IAP/RAS, Nizhny Novgorod, Russia
  • A.V. Arzhannikov, E.S. Sandalov, S.L. Sinitsky, D.I. Skovorodin, A.A. Starostenko
    BINP SB RAS, Novosibirsk, Russia
 
  Funding: This work was supported by the Russian Scientific Foundation (RSCF), grant No. 19-12-00212.
The paper is devoted to development of high-power long-pulse THz-band FELs based on new generation of linear induction accelerators which have been elaborated recently at Budker Institute (Novosibirsk). These accelerators generate microsecond electron beams with current at kA-level and energy of 2 to 5 MeV (with a possibility to increase electrons energy up to 20 MeV). Based on this beam, we initiated a new project of multi-MW long-pulse FEL operating in the frequency range of 1 to 10 THz using a wiggler period of 3 to 6 cm. For this FEL oscillator, we suggest a hybrid planar two-mirror resonator consisting of an upstream highly selective advanced Bragg reflector and a downstream weakly reflecting conventional Bragg reflector. Simulations demonstrate that the advanced Bragg reflector based on coupling of propagating and quasi-cutoff waves ensures the mode control at the values of the gap between the corrugated plates forming such resonator up to 20 wavelengths. Simulations of the FEL driven by electron beam generated by the LIU’2 in the frame of both averaged approach and 3D PIC code demonstrate that the THz radiation power can reach the level of 10 to 20 MW.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP021  
About • paper received ※ 28 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP024 Electronic Modulation of the FEL-Oscillator Radiation Power Driven by ERL FEL, radiation, experiment, controls 98
 
  • O.A. Shevchenko, E.V. Bykov, Ya.V. Getmanov, S.S. Serednyakov, S.V. Tararyshkin
    BINP SB RAS, Novosibirsk, Russia
  • M.V. Fedin, A.R. Melnikov, S.L. Veber
    International Tomography Center, SB RAS, Novosibirsk, Russia
  • Ya.V. Getmanov, S.S. Serednyakov
    NSU, Novosibirsk, Russia
 
  FEL oscillators usually operate in CW mode and produce periodic train of radiation pulses but some user experiments require modulation of radiation power. Conventional way to obtain this modulation is using of mechanical shutters but it cannot provide very short switching time and may lead to decreasing of the radiation beam quality. Another way could be based on the electron beam current modulation but it cannot be used in the ERL. We propose a simple way of fast control of the FEL lasing which is based on periodic phase shift of electron bunches with respect to radiation stored in optical cavity. The phase shift required to suppress lasing is relatively small and it does not change significantly repetition rate. This approach has been realized at NovoFEL facility. It allows to generate radiation macropulses of desirable length down to several microseconds (limited by quality factor of optical cavity and FEL gain) which can be synchronized with external trigger. We present detailed description of electronic power modulation scheme and discuss the results of experiments.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP024  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP025 Current Status of Free Electron Laser @ TARLA FEL, cryomodule, cavity, undulator 102
 
  • A. Aksoy, Ö. Karslı, C. Kaya, İ.B. Koç
    Ankara University, Accelerator Technologies Institute, Golbasi, Turkey
  • Ö.F. Elçim
    Ankara University Institute of Accelerator Technologies, Golbasi, Turkey
 
  Funding: Work supported by Strategy and Budget Department of Turkey with Grand No: 2006K120470
Turkish Accelerator and Radiation Laboratory (TARLA), which is supported by the Presidency Strategy and Budget Directorate of Turkey, aims to be the state of art research instrument for the radiation users from Turkey. Two superconducting accelerating modules of TARLA will drive two different planar undulator magnets with periods of 110 mm (U110) and 35 mm (U35) in order to generate high brightness Continuous Wave (CW) Free Electron Laser (FEL) tunable in between 5-350 µm. In addition, the linac will drive a Bremstrahlung radiation station to generate polarized gamma radiation. Main components of TARLA, such as injector, superconducting accelerating modules and cryoplant are under commissioning currently. In this study, we present current status of the facility in addition to expected FEL performance of the facility.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP025  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP026 Unaveraged Simulation of a Regenerative Amplifier Free Electron Laser FEL, undulator, cavity, simulation 106
 
  • P. Pongchalee, B.W.J. MᶜNeil
    USTRAT/SUPA, Glasgow, United Kingdom
  • B.W.J. MᶜNeil
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
 
  A regenerative amplifier free-electron laser (RAFEL) design and simulation requires the modelling of both the electron-light interaction in the FEL undulator and the optical propagation within the cavity. An unaveraged 3D simulation was used to model the FEL interaction within the undulator using the Puffin code. This allows a broadband, high temporal-resolution of the FEL interaction. The Optical Propagation Code (OPC) was used to model the optical beam propagation within the cavity and diagnostics at the cavity mirrors. This paper presents the optical field conversion method between Puffin and the OPC codes and demonstrates the full model via a VUV-RAFEL simulation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP026  
About • paper received ※ 19 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP028 Power Variations of an X-ray FEL Oscillator in Saturation FEL, simulation, cavity, undulator 114
 
  • R.R. Lindberg, K. Kim
    ANL, Lemont, Illinois, USA
 
  Funding: Work supported by U.S. Dept. of Energy Office of Sciences under Contract No. DE-AC02-06CH11357.
Basic FEL theory predicts that the fractional power fluctuations of an ideal oscillator in steady state should be given by the ratio of the spontaneous power in the oscillator bandwidth to that stored in the cavity at saturation. For the X-ray FEL oscillator with its narrow bandwidth Bragg crystal mirrors, this ratio is typically a few parts per million, but some simulations have shown evidence of power oscillations on the percent level. We show that this is not related to the well-known sideband instability, but rather is purely numerical and can be eliminated by changing the particle loading. We then briefly discuss to what extent variations in electron beam arrival time may degrade the power stability.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP028  
About • paper received ※ 20 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP032 Regenerative Amplification for a Hard X-Ray Free-Electron Laser FEL, cavity, radiation, undulator 118
 
  • G. Marcus, Y. Ding, Y. Feng, A. Halavanau, Z. Huang, J. Krzywiński, J.P. MacArthur, R.A. Margraf, T.O. Raubenheimer, D. Zhu
    SLAC, Menlo Park, California, USA
  • V. Fiadonu
    Santa Clara University, Santa Clara, California, USA
 
  Funding: This work was supported by the Department of Energy, Laboratory Directed Research and Development program at SLAC National Accelerator Laboratory, under contract DE-AC02-76SF00515.
An X-ray regenerative amplifier FEL (XRAFEL) utilizes an X-ray crystal cavity to provide optical feedback to the entrance of a high-gain undulator. An XRAFEL system leverages gain-guiding in the undulator to reduce the cavity alignment tolerances and targets the production of longitudinally coherent and high peak power and brightness X-ray pulses that could significantly enhance the performance of a standard single-pass SASE amplifier. The successful implementation of an X-ray cavity in the XRAFEL scheme requires the demonstration of X-ray optical components that can either satisfy large output coupling constraints or passively output a large fraction of the amplified coherent radiation. Here, we present new schemes to either actively Q-switch a diamond Bragg crystal through lattice constant manipulation or passively output couple a large fraction of the stored cavity radiation through controlled FEL microbunch rotation. A beamline design study, cavity stability analysis, and optimization will be presented illustrating the performance of potential XRAFEL configurations at LCLS-II/-HE using high-fidelity simulations.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP032  
About • paper received ※ 24 August 2019       paper accepted ※ 26 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP033 Q-Switching of X-Ray Optical Cavities by Using Boron Doped Buried Layer Under a Surface of a Diamond Crystal laser, FEL, cavity, free-electron-laser 122
 
  • J. Krzywiński, Y. Feng, A. Halavanau, Z. Huang, A.M. Kiss, J.P. MacArthur, G. Marcus, T. Sato, D. Zhu
    SLAC, Menlo Park, California, USA
 
  Improvement of the longitudinal coherence of X-ray Free Electron Lasers has been the subject of many recent investigations. The XFEL oscillator (XFELO) and Regenerative Amplifier Free-Electron Laser (RAFEL) schemes offer a pathway to fully coherent, high brightness X-ray radiation. The XFELO and RAFEL consist of a high repetition rate electron beam, an undulator and an X-ray crystal cavity to provide optical feedback. The X-ray cavity will be based on diamond crystals in order to manage a high thermal load. We are investigating a ’Q switching’ mechanism that involves the use of a ’Bragg switch’ to dump the X-ray pulse energy built-up inside an X-ray cavity. In particular, one can use an optical laser to manipulate the diamond crystal lattice constant to control the crystal reflectivity and transmission. It has been shown that a 9 MeV focused boron beam can create a buried layer, approximately 5 microns below surface, with a boron concentration up to 1021 atoms/cm3. Here, we present simulations showing that absorbing laser pulses by a buried layer under the crystal surface would allow creating a transient temperature profile which would be well suited for the ’Q switching’ scheme.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP033  
About • paper received ※ 21 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP035 Sensitivity of LCLS Self-Seeded Pedestal Emission to Laser Heater Strength laser, free-electron-laser, experiment, bunching 126
 
  • G. Marcus, D.K. Bohler, Y. Ding, W.M. Fawley, Y. Feng, E. Hemsing, Z. Huang, J. Krzywiński, A.A. Lutman, D.F. Ratner
    SLAC, Menlo Park, California, USA
 
  Measurements of the soft X-ray, self-seeding spectrum at the LCLS free-electron laser generally display a pedestal-like distribution around the central seeded wavelength that degrades the spectral purity. We have investigated the detailed experimental characteristics of this pedestal and found that it is comprised of two separate components: (1) normal SASE whose total strength is nominally insensitive to energy detuning and laser heater (LH) strength; (2) sideband-like emission whose strength positively correlates with that of the amplified seed and negatively with energy detuning and LH strength. We believe this latter, non-SASE component arises from comparatively long wavelength amplitude and phase modulations of the main seeded radiation line. Its shot-to-shot variability and LH sensitivity suggests an origin connected to growth of the longitudinal microbunching instability on the electron beam. Here, we present experimental results taken over a number of shifts that illustrate the above mentioned characteristics.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP035  
About • paper received ※ 28 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP036 A Waveguide-Based High Efficiency Super-Radiant FEL Operating in the THz Regime FEL, GUI, radiation, undulator 127
 
  • P. Musumeci, A.C. Fisher
    UCLA, Los Angeles, California, USA
  • A. Gover
    University of Tel-Aviv, Faculty of Engineering, Tel-Aviv, Israel
  • E.A. Nanni, E.J. Snively
    SLAC, Menlo Park, California, USA
  • S.B. van der Geer
    Pulsar Physics, Eindhoven, The Netherlands
 
  Funding: DOE grant No. DE-SC0009914 and NSF grant PHY-1734215
In this paper we describe a novel self-consistent 3D simulation approach for a waveguide FEL operating in the zero-slippage regime to generate high power THz radiation. In this interaction regime, the phase and group velocity of the radiation are matched to the relativistic beam traveling in the undulator achieving long interaction lengths. Our numerical approach is based on expanding the existing 3D particle tracking code GPT (General Particle Tracer) to follow the interaction of the particles in the beam with the electromagnetic field modes of the waveguide. We present two separate studies: one for a case which was benchmarked with experimental results and another one for a test case where, using a longer undulator and larger bunch charge, a sizable fraction of the input beam energy can be extracted and converted to THz radiation. The model presented here is an important step in the development of the zero-slippage FEL scheme as a source for high average and peak power THz radiation.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP036  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP037 Optimization of the Transverse Gradient Undulator (TGU) for Application in a Storage Ring Based XFELO radiation, storage-ring, emittance, undulator 131
 
  • Y.S. Li
    University of Chicago, Chicago, Illinois, USA
  • K. Kim, R.R. Lindberg
    ANL, Lemont, Illinois, USA
 
  Funding: U.S. Dept. of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357
The stringent energy spread requirement of the XFELO poses a challenge for its application in storage rings. One way to overcome this is by using a transverse gradient undulator (TGU) [1]. The TGU gain formula was discussed previously [2]. In this paper, we begin by reviewing the analytical 3D gain formula derived from the gain convolution formula. Following that, we apply numerical optimization to investigate the optimal beam and field parameters for maximal TGU gain. We found that a small emittance ratio (i.e. "flat beam" configuration) has a strong positive impact on TGU gain, as well as other patterns in the optimal parameters.
[1] T. I. Smith et al., J. Appl. Phys. 50 (1979) 4580
[2] R. R. Lindberg et al., in Proceedings FEL’13, New York, USA, 2013, pp. 740-748, paper THOBNO02
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP037  
About • paper received ※ 19 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP038 Axial Symmetry in Spontaneous Undulator Radiation for XFELO Two-Bunch Experiment FEL, experiment, laser, radiation 134
 
  • Y.S. Li
    University of Chicago, Chicago, Illinois, USA
  • K. Kim, R.R. Lindberg
    ANL, Lemont, Illinois, USA
 
  Funding: U.S. DOE, Office of Science, Office of BES, under Contract No. DE-AC02-06CH11357 and National Science Foundation under Award No. PHY-1549132, the Center for Bright Beams.
A well known discrepancy exists between 2D and 3D FEL simulation codes with respect to the radiation field intensity prior to the exponential gain regime [1]. This can be qualitatively explained by the fact that the 3D field representation preserves many more modes than does the axisymmetric field solved for by a 2D code. In this paper, we seek to develop an analytical model that quantifies this difference. We begin by expanding the spontaneous undulator radiation field as a multipole series, whose lowest order mode is axisymmetric. This allows us to calculate the difference in predicted intensity. Next, we confirm these results with numerical calculation and existing FEL codes GINGER and GENESIS. Finally, we discuss the implications of this study with respect to the XFELO two-bunch experiment to be conducted at LCLS-II.
[1] Z. Huang and K.-J. Kim, "Review of X-ray free-electron laser theory", Phys. Rev. ST-AB, vol. 10, p. 034801, 2007.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP038  
About • paper received ※ 19 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP041 X-cos SCILAB Model for Simulation of Intensity and Gain of Planar Undulator Radiation undulator, simulation, radiation, FEL 138
 
  • H. Jeevakhan
    NITTTR, Bhopal, India
  • G. Mishra
    Devi Ahilya University, Indore, India
 
  SCILAB X-cos based model has been designed to simulate the Intensity and Gain of planar undulator radiation. Numerical approach has been used to determine the trajectories of an electron along x and z direction, traversing through a planar undulator. The present paper describes the technical details of the different blocks, parameters and possibility of combined model used for trajectory and intensity simulation Results are compared with the previous conventional syntax based codes.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP041  
About • paper received ※ 01 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP042 Analysis of Undulator Radiations With Asymmetric Beam and Non-Periodic Magnetic Field undulator, radiation, FEL, resonance 141
 
  • H. Jeevakhan
    NITTTR, Bhopal, India
  • G. Mishra
    Devi Ahilya University, Indore, India
 
  Harmonic Undulator radiations at third harmonics with non periodic constant magnetic field has been analysed. Symmetric and asymmetric electron beam with homogeneous spread has been used to present viable solution for the resonance shift inherited in undulator with constant magnetic field. The radiation recovers shifts in resonance and regain its intensity with asymmetric electron beam and harmonic field
Harmonic undulator, energy spread
 
poster icon Poster TUP042 [2.886 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP042  
About • paper received ※ 01 August 2019       paper accepted ※ 31 October 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP047 An Analysis of Optimal Initial Detuning for Maximum Energy-Extraction Efficiency extraction, FEL, synchrotron, undulator 145
 
  • Q.K. Jia
    USTC/NSRL, Hefei, Anhui, People’s Republic of China
 
  For low gain free electron laser (FEL), the phase space evolutions of trapped electrons in the phase bucket are analyzed through calculating their synchrotron oscillation periods, which vary with the initial detuning and initial phase. The optimal initial detuning for the maximum energy-extraction efficiency and the corresponding saturation length are given. The analysis demonstrated that for the low gain case the gain of the strong optical field is about a quarter of that of the weak optical field (small signal gain), and the saturation power larger than that of high gain FEL can be achieved in the resonator of oscillator FEL.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP047  
About • paper received ※ 19 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP049 Simulating Shot-Noise of ’Real’ Electron Bunches micro-particles, FEL, simulation, bunching 149
 
  • P. Traczykowski, L.T. Campbell, B.W.J. MᶜNeil
    USTRAT/SUPA, Glasgow, United Kingdom
  • L.T. Campbell, B.W.J. MᶜNeil, P. Traczykowski
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
  • L.T. Campbell, P. Traczykowski
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
 
  An algorithm and numerical code for the up-sampling of a system of particles, from a smaller to a larger number, is described. The method introduces a Poissonian ’shot-noise’ to the up-sampled distribution [1], typical of the noise statistics arising in a bunch of particles generated by a particle accelerator. The algorithm is applied on a phase-space distribution of relatively few simulation particles representing an electron beam generated by particle accelerator modelling software, for subsequent injection into an Free Electron Laser (FEL) amplifier which is used here to describe the model. A much larger number of particles is usually required to model the FEL lasing process than is required in the simulation models of the electron beam accelerators that drive it. A numerical code developed from the algorithm was then used to generate electron bunches for injection into to an unaveraged 3D FEL simulation code, Puffin [2]. Results show good qualitative and quantitative agreement with analytical theory. The program and usage manual is available to download from GitHub [3].
[1] B.W.J. McNeil, M.W. Poole and G.R.M. Robb, Physical Review Special Topics - Accelerators and Beams Vol 6, 070701 (2003).
[2] L.T. Campbell and B.W.J. McNeil, Phys. Plasmas 19, 093119 (2012).
[3] https://github.com/UKFELs/JDF
 
poster icon Poster TUP049 [1.419 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP049  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP050 Comparison Between, and Validation Against an Experiment of, a Slowly-varying Envelope Approximation Code and a Particle-in-Cell Simulation Code for Free-Electron Lasers undulator, FEL, simulation, experiment 153
 
  • P. Traczykowski, L.T. Campbell, J. Henderson, B.W.J. MᶜNeil
    USTRAT/SUPA, Glasgow, United Kingdom
  • L.T. Campbell, J. Henderson, P. Traczykowski
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
  • H. Freund
    University of New Mexico, Albuquerque, USA
  • B.W.J. MᶜNeil, P. Traczykowski
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
  • P.J.M. van der Slot
    Mesa+, Enschede, The Netherlands
 
  Free-electron laser simulation codes employ either the Slowly-Varying Envelope Approximation (SVEA) or a Particle-in-Cell (PiC) formulation. Maxwell’s equations are averaged over the fast time scale in the SVEA so that there is no need to resolve the wave period. In contrast, the fast oscillation is retained in PiC codes. As a result, the SVEA codes are much less computationally intensive and are used more frequently than PiC codes. While the orbit dynamics in PiC codes and some SVEA Codes (MEDUSA and MINERVA) use the full unaveraged Lorentz force equations, some SVEA codes use the Kroll-Morton-Rosenbluth (KMR) approximation (GENESIS, GINGER, FAST, and TDA3D). Steady-state simulation comparisons [1] have appeared in the literature between different codes using the averaged and unaveraged particle dynamics. Recently, a comparison between three KMR SVEA codes (GENESIS, GINGER, and FAST) and the PUFFIN PiC code in the time-dependent regime has been reported [2]. In this paper, we present a comparison between the unaveraged PiC code PUFFIN, the unaveraged SVEA code MINERVA for the time-dependent simulation of SASE free-electron lasers with the experimental measurements from SPARC SASE FEL at ENEA Frascati.
[1] S.G. Biedron et al., NIMA 445, 110 (2000).
[2] B. Garcia et al., paper presented at the 38th International Free Electron Laser Conference, Santa Fe, New Mexico, 20 - 25 August 2017.
 
poster icon Poster TUP050 [0.908 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP050  
About • paper received ※ 02 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP051 Plasma Accelerator Driven Coherent Spontaneous Emission FEL, radiation, bunching, undulator 157
 
  • B.M. Alotaibi, R. Altuijri
    PNU, Riyadh, Kingdom of Saudi Arabia
  • B.M. Alotaibi, R. Altuijri, A.F. Habib, B. Hidding, B.W.J. MᶜNeil, P. Traczykowski
    USTRAT/SUPA, Glasgow, United Kingdom
  • A.F. Habib, B. Hidding, B.W.J. MᶜNeil, P. Traczykowski
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
 
  Plasma accelerators [1] are a potentially important source of high energy, low emittance electron beams with high peak currents generated within a relatively short distance. As such, they may have an important application in the driving of coherent light sources such as the Free Electron Laser (FEL) which operate into the X-ray region [2]. While novel plasma photocathodes [3] may offer orders of magnitude improvement to the normalized emittance and brightness of electron beams compared to Radio Frequency-driven accelerators, a substantial challenge is the energy spread and chirp of beams, which can make FEL operation impossible. In this paper it is shown that such an energy-chirped, ultrahigh brightness electron beam, with dynamically evolving current profile due to ballistic bunching at moderate energies, can generate significant coherent radiation output via the process of Coherent Spontaneous Emission (CSE)[4]. While this CSE is seen to cause some FEL-induced electron bunching at the radiation wavelength, the dynamic evolution of the energy chirped pulse dampens out any high-gain FEL interaction.
[1] E. Esary et al., Reviews of Modern Physics p. 1229 (2009).
[2] B. W. J. McNeil and N. R. Thompson, 2010 Nat. Photon.4 814-21
[3] B. Hidding et al., 2012 Phys. Rev. Lett. 108 035001
[4] L. T. Campbell and B. W. J. McNeil, 2012, in Proc. FEL2012
 
poster icon Poster TUP051 [1.401 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP051  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP054 An Investigation of Possible Non-Standard Photon Statistics in a Free-Electron Laser II: Theory photon, FEL, radiation, laser 165
 
  • J.-W. Park
    University of Hawaii, Honolulu,, USA
  • K.-J. Kim, R.R. Lindberg
    ANL, Lemont, Illinois, USA
  • K.-J. Kim
    University of Chicago, Chicago, Illinois, USA
 
  Funding: Work supported by U.S. DOE, Office of Science, Office of BES, under Award No. DE-SC0018428.
In this paper we explore whether we can at present find a theoretical basis for non-standard, sub-Poissonian photon statistics in the coherent spontaneous harmonic radiation of an FEL as was claimed to have been measured with the Mark III FEL [1]. We develop a one dimensional quantum FEL oscillator model of the harmonic radiation in the linear gain regime to calculate the photon statistics. According to our study, it seems unlikely that the photon statistics for an FEL oscillator starting from the noise could be sub-Poissonian.
[1] T. Chen and J.M. Madey, J. Phys. Rev. Lett. 86, 5906 (2001).
 
poster icon Poster TUP054 [0.386 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP054  
About • paper received ※ 21 August 2019       paper accepted ※ 16 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP055 Two-Color Operation of FLASH2 Undulator undulator, laser, FEL, operation 168
 
  • E. Schneidmiller, M. Braune, B. Faatz, U. Jastrow, M. Kuhlmann, A.A. Sorokin, K.I. Tiedtke, M.V. Yurkov
    DESY, Hamburg, Germany
 
  FLASH is the first soft X-ray FEL user facility, routinely providing brilliant photon beams for users since 2005. The second undulator branch of this facility, FLASH2, is gap-tunable which allows to test and use advanced lasing concepts. In particular, we tested recently a two-color mode of operation based on the alternation of tunes of the undulator segments (every other segment is tuned to the second wavelength). This scheme is advantageous in comparison with a subsequent generation of two colors in two different parts of the undulator. First, source positions of two FEL beams are close to each other which makes it easier to handle them. Second, the amplification is more efficient in this configuration since the segments with respectively "wrong" wavelength act as bunchers. We developed methods for online intensity measurements of the two colors simultaneously that require a combination of two detectors. We present some examples of such measurements in the XUV and soft X-ray regimes.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP055  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP056 Feasibility Studies of the 100 keV Undulator Line of the European XFEL undulator, FEL, photon, laser 172
 
  • E. Schneidmiller, V. Balandin, W. Decking, M. Dohlus, N. Golubeva, D. Nölle, M.V. Yurkov, I. Zagorodnov
    DESY, Hamburg, Germany
  • G. Geloni, Y. Li, S. Molodtsov, J. Pflüger, S. Serkez, H. Sinn, T. Tanikawa, S. Tomin
    EuXFEL, Schenefeld, Germany
 
  The European XFEL is a multi-user X-ray FEL facility based on superconducting linear accelerator. Presently, three undulators (SASE1, SASE2, SASE3) deliver high-brightness soft- and hard- X-ray beams for users. There are two empty undulator tunnels that were originally designed to operate with spontaneous radiators. We consider instead a possible installation of two FEL undulators. One of them (SASE4) is proposed for the operation in ultrahard X-ray regime, up to the photon energy of 100 keV. In this contribution we present the results of the first feasibility studies of this option.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP056  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP057 Analysis of Parameter Space of Soft X-Ray Free Electron Laser at the European XFEL Driven by High and Low Energy Electron Beam undulator, FEL, radiation, operation 176
 
  • E. Schneidmiller, M.V. Yurkov
    DESY, Hamburg, Germany
 
  Three undulator beamlines: SASE1 and SASE2 (hard X-ray), and SASE3 (soft X-ray) are in operation at the European XFEL serving six user instruments. Next stages of the facility development are installation of two undulator beamlines in empty tunnels SASE4 and SASE5 as medium term upgrade, and extension of the facility with the second fan of undulators as long term upgrade. Construction of soft X-ray beamlines is considered in both upgrade scenario. In the case of SASE4/SASE5 electron beam with energies 8.5 GeV - 17.5 GeV will be used in order to provide simultaneous operation of new undulator beamlines with existing SASE1-SASE3. One of the scenarios for a second fan of undulators involves using of low energy (2.5 GeV) electron beam. In this paper we analyze parameter space of soft X-ray SASE FELs driven by high energy and low energy electron beam, compare output characteristics, and discuss potential advantages and disadvantages.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP057  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP058 First Characterization of the Photon Beam at the European XFEL in July, 2017 FEL, radiation, photon, undulator 180
 
  • V. Balandin, B. Beutner, F. Brinker, W. Decking, M. Dohlus, L. Fröhlich, U. Jastrow, R. Kammering, T. Limberg, D. Nölle, M. Scholz, A.A. Sorokin, K.I. Tiedtke, M.V. Yurkov, I. Zagorodnov
    DESY, Hamburg, Germany
  • U. Boesenberg, W. Freund, J. Grünert, A. Koch, N.G. Kujala, J. Liu, Th. Maltezopoulos, M. Messerschmidt, I. Petrov, L. Samoylova, H. Sinn
    EuXFEL, Schenefeld, Germany
 
  North branch of the European XFEL, SASE1, produced first light on May 3rd, 2017, and XFEL operation has been gradually improved then. First characterization of the photon beam has been performed in July / August 2017, just before an official starting date of user experiments (September 1st, 2017). Energy of the electron beam was 14 GeV, bunch charge was 500 pC, photon energy was 9.3 keV. With photon diagnostics available at that time (X-ray gas monitor (XGM) and FEL imager) we measured the gain curve and traced evolution of the FEL radiation mode along the undulator. An important conclusion is that experimental results demonstrate reasonable agreement with baseline parameters. Developed techniques of the photon beam characterization also provided solid base for identification of the problems and means for improving SASE FEL tuning and operation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP058  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP059 Influence of Energy Chirp in the Electron Beam and Undulator Tapering on Spatial Properties of the Radiation From Seeded and SASE FEL FEL, undulator, radiation, laser 184
 
  • E. Schneidmiller, M.V. Yurkov
    DESY, Hamburg, Germany
 
  Energy chirp and undulator tapering change resonance condition along the electron beam and undulator which results in modification of the radiation amplification process. Well known examples are post-saturation undulator tapering for radiation power increase, reverse undulator tapering for effective operation of afterburners, and application of linear undulator tapering for compensation of energy chirp effect. These are essentially one dimensional effects. In addition, energy chirp and undulator tapering also change spatial properties of the radiation which can be important for the users of X-ray FEL facilities. In this report we present detailed analysis of the spatial properties of the radiation from an FEL amplifier with tapered undulator and chirped electron beam. Two configurations, seeded FEL amplifier, and SASE FEL are under consideration. Dependence of the spatial distributions on the electron beam properties is studied, and their evolution along the undulator is traced. It is shown that spatial properties of the radiation may be significantly distorted by the effects of energy chirp in the electron beam and undulator tapering.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP059  
About • paper received ※ 24 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP060 An Advanced Compression Option for the European XFEL undulator, laser, photon, FEL 187
 
  • I. Zagorodnov, M. Dohlus, E. Schneidmiller, M.V. Yurkov
    DESY, Hamburg, Germany
 
  An advanced compression scheme which allows to obtain a high peak current while preserving the low slice emittance is considered. The beam is compressed weakly in the bunch compressors and the current is increased by eSASE setup at the entrance of the undulator line. It is shown by numerical studies that such approach allows to reduce harmful collective effects in the bunch compressors and in the transport line. Simulations of FEL physics confirm the possibility to obtain a high level of SASE radiation at the ultra-hard photon energy level of 100 keV.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP060  
About • paper received ※ 19 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP061 Super-X: Simulations for Extremely Hard X-Ray Generation With Short Period Superconducting Undulators for the European XFEL FEL, undulator, photon, simulation 191
 
  • S. Serkez, G. Geloni, S. Karabekyan, Y. Li, T. Tanikawa, S. Tomin, F. Wolff-Fabris
    EuXFEL, Schenefeld, Germany
  • C. Boffo
    Bilfinger Noell GmbH, Wuerzburg, Germany
  • S. Casalbuoni
    KIT, Eggenstein-Leopoldshafen, Germany
  • M. Dohlus, E. Schneidmiller, M.V. Yurkov, I. Zagorodnov
    DESY, Hamburg, Germany
  • A. Trebushinin
    BINP, Novosibirsk, Russia
 
  The European XFEL is a high-repetition multi-user facility with nominal photon energy range covering almost 3 orders of magnitude: 250 eV - 25 keV. In this work we explore the possibility to extend the photon energy range of the facility up to 100 keV via combination of superconducting undulator technology, period doubling and harmonic lasing, thus allowing for excellent tunability. To this purpose, we propose a dedicated FEL line, discuss its overall concept and provide analytical and numerical estimations of its expected performance.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP061  
About • paper received ※ 20 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP062 Two Colors at the SASE3 Line of the European XFEL: Project Scope and First Measurements FEL, photon, experiment, radiation 195
 
  • S. Serkez, G. Geloni, N. Gerasimova, J. Grünert, S. Karabekyan, A. Koch, J. Laksman, Th. Maltezopoulos, T. Mazza, M. Meyer, S. Tomin
    EuXFEL, Schenefeld, Germany
  • W. Decking, L. Fröhlich, V. Kocharyan, Y.A. Kot, E. Saldin, E. Schneidmiller, M. Scholz, M.V. Yurkov, I. Zagorodnov
    DESY, Hamburg, Germany
  • M. Huttula
    University of Oulu, Oulu, Finland
  • E. Kukk
    University of Turku, Turku, Finland
 
  The European XFEL is a high-repetition rate facility that generates high-power SASE radiation pulses in three beamlines. A joint upgrade project, with Finnish universities, to equip the SASE3 beamline with a chicane has been recently approved to generate two SASE pulses with different photon energies and temporal separation. In this work we report the status of the project, its expected performance, and recent experimental results. Additionally, we discuss methods to diagnose the properties of the generated radiation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP062  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP063 Physical Design and FEL Performance Study for FEL-III Beamline of SHINE FEL, undulator, wakefield, photon 199
 
  • N. Huang
    SINAP, Shanghai, People’s Republic of China
  • H.X. Deng, B. Liu, D. Wang
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
 
  The first hard X-ray free electron laser (XFEL) facility in China, the Shanghai High-Repetition-Rate XFEL and Extreme Light Facility (SHINE), is under construction, which allows for generating X-ray pulses in the photon energy range from 3 keV to 25 keV. To produce X-ray pulses with photon energy up to 25 keV, FEL-III undulator line of SHINE employs superconducting undulators. However, the smaller gap of the superconducting undulator poses serious wakefield effect reducing the FEL power, compared to the normal planar undulator. For a setup design optimization, the design and performance of the FEL-III undulator line are presented using start-to-end beam simulations at self-amplified spontaneous emission (SASE) and self-seeding mode. The wakefield impact on FEL performance is then investigated. A linear undulator tapering technique is adopted for recovering the FEL power to the non-wakefield level.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP063  
About • paper received ※ 19 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP064 Effect on FEL Gain Curve Using Phase Shifters FEL, undulator, laser, simulation 203
 
  • M.H. Cho, H.-S. Kang, G. Kim, C.H. Shim, H. Yang
    PAL, Pohang, Republic of Korea
 
  Phase matching between FEL and electron beam should be precisely controlled for FEL amplification. Phase shifters located between undulators performs the phase matching. An electron beam can be controlled to be in the in- or out-phase by setting the phase shifters from the phase shifter scan. In this article, we show effects of FEL gain curve by setting the in- and out-phase of electron beam. We address reasons of the reduction of FEL intensity in the out-phase condition dividing the linear and saturation FEL amplification regimes. In the linear regime the gain curve is shifted, and in the saturation regime the electron loss occurs during the undulator tapering. Our results show agreements with experiments performed at PAL-XFEL.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP064  
About • paper received ※ 21 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP065 Optimization of a Coherent Undulator Beamline for New Advanced Synchrotron Light Source in Korea undulator, synchrotron, FEL, radiation 206
 
  • I.G. Jeong, P. Buaphad, Y.J. Joo, Y. Kim, H.R. Lee
    University of Science and Technology of Korea (UST), Daejeon, Republic of Korea
  • P. Buaphad, Y.J. Joo, Y. Kim, H.R. Lee
    KAERI, Jeongeup-si, Republic of Korea
  • M.Y. Han, I.G. Jeong, J.Y. Lee, S.H. Lee
    Korea Atomic Energy Research Institute (KAERI), Daejeon, Republic of Korea
 
  Recently, the demand for a new advanced synchrotron light source in Korea is rapidly growing. Six local governments in Korea would like to host the new synchrotron light source project in their own provinces. The new advanced synchrotron light source will be the Diffraction-Limited Storage Ring (DLSR), which is based on the Multi-Bend Achromat (MBA) lattice. For the new synchrotron light source, we would like to build a special 60-m long coherent undulator beamline, which can deliver high-intensity coherent radiation at the hard X-ray region. To design the coherent undulator beamline, we have performed numerous beam dynamics simulations with GENESIS and SIMPLEX codes. In this paper, we report design concepts and those simulation results for the coherent undulator beamline.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP065  
About • paper received ※ 26 August 2019       paper accepted ※ 26 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP066 Start-to-End Simulations for the Soft X-Ray FEL at the MAX IV Laboratory FEL, simulation, linac, undulator 210
 
  • W. Qin, J. Andersson, F. Curbis, L. Isaksson, M. Kotur, E. Mansten, M.A. Pop, S. Thorin, S. Werin
    MAX IV Laboratory, Lund University, Lund, Sweden
  • F. Curbis, S. Werin
    SLF, Lund, Sweden
 
  Funding: The work is supported by Knut and Alice Wallenberg foundation.
A Soft X-ray FEL (the SXL) using the existing 3 GeV linac at the MAX IV Laboratory is currently in the design phase. In this contribution, start-to-end simulations, including the photo-injector simulations using ASTRA, the linac simulations using ELEGANT and the FEL simulations using GENESIS, are presented for 100 pC and 10 pC operation modes. The features of the electron beam from the MAX IV linac and their impact on the FEL performance are discussed.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP066  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP067 Advanced Concepts in the Design for the Soft X-Ray FEL at MAX IV undulator, FEL, laser, brightness 214
 
  • W. Qin, F. Curbis, M.A. Pop, S. Werin
    MAX IV Laboratory, Lund University, Lund, Sweden
  • F. Curbis, S. Werin
    SLF, Lund, Sweden
 
  Funding: The work is supported by Knut and Alice Wallenberg foundation.
A Soft X-ray FEL (the SXL) is currently being designed at the MAX IV Laboratory. In the work to adapt the FEL to the scientific cases several advanced options are being studied for coherence enhancement, generation of short pulses and two-color pulses. We will discuss the current status and the schemes studied, especially regarding the FEL performance with the features of the MAX IV linac, including a positive energy chirp.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP067  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP072 Orbital Angular Momentum from SASE quadrupole, radiation, FEL, undulator 218
 
  • J.F. Morgan, B.W.J. MᶜNeil
    USTRAT/SUPA, Glasgow, United Kingdom
  • B.W.J. MᶜNeil, J.F. Morgan, B.D. Muratori, P.H. Williams, A. Wolski
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
  • B.D. Muratori, P.H. Williams
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
  • A. Wolski
    The University of Liverpool, Liverpool, United Kingdom
 
  Radiation with orbital angular momentum, OAM, has many applications such as in imaging systems and microscopic tweezers [1]. The feasibility of generating light with OAM in a free electron laser, FEL, from amplified shot noise in an electron beam is investigated using the FEL simulation code Puffin [2]. This may allow generation of OAM radiation at shorter wavelengths than currently available, as well as the opportunity to incorporate the technique with other SASE manipulation schemes such as mode locking [3].
[1] A. M. Yao and M. J. Padgett, Adv. Opt. Photon. 3, 161(2011)
[2] L. T. Campbell and B. W. J. McNeil, Phys. Plasmas. 19, 093119(2012)
[3] D. J. Dunning, B. W. J. McNeil, and N. R. Thompson, Phys. Rev. Lett. 110, 104801(2013)
 
poster icon Poster TUP072 [1.311 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP072  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP073 High-Repetition-Rate Seeding Schemes Using a Resonator-Amplifier Setup FEL, laser, radiation, cavity 222
 
  • S. Ackermann, B. Faatz, V. Grattoni, C. Lechner, G. Paraskaki
    DESY, Hamburg, Germany
  • G. Geloni, S. Serkez, T. Tanikawa
    EuXFEL, Schenefeld, Germany
  • W. Hillert
    University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
 
  The spectral and temporal properties of Free-Electron Lasers (FEL) operating on the basis of self-amplified spontaneous emission (SASE) suffer from the stochastic behavior of the start-up process. Several so-called "seeding"-techniques using external radiation fields to overcome this limitation have been proposed and demonstrated. The external seed is usually generated by demanding, high-power laser systems, which are not available with a sufficient laser pulse energy at the high repetition rates of superconducting FEL facilities. In this contribution we discuss several seeding schemes that lower the requirements for the used laser systems, enabling seeded operation at high repetition rates by the means of a resonator-amplifier setup.  
poster icon Poster TUP073 [0.521 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP073  
About • paper received ※ 06 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP074 FLASH Upgrade for Seeding FEL, laser, undulator, simulation 226
 
  • V. Grattoni, S. Ackermann, B. Faatz, T. Lang, C. Lechner, M.M. Mohammad Kazemi, G. Paraskaki
    DESY, Hamburg, Germany
  • W. Hillert
    University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
 
  An upgrade for FLASH, the SASE FEL in Hamburg, is planned after 2020 aiming at fulfilling user requirements like fully coherent, variable polarization, and multi-colour pulses. In this proceeding, we focus on the FLASH1 beamline that will be operated in seeded mode at a high repetition rate. In particular, we will present and discuss the proposed seeding schemes for delivering FEL radiation with wavelengths from 60 down to 4 nm  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP074  
About • paper received ※ 19 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP076 Seeding R&D at sFLASH laser, FEL, free-electron-laser, experiment 230
 
  • C. Lechner, S. Ackermann, R.W. Aßmann, B. Faatz, V. Grattoni, I. Hartl, S.D. Hartwell, R. Ivanov, T. Laarmann, T. Lang, M.M. Mohammad Kazemi, G. Paraskaki, A. Przystawik, J. Zheng
    DESY, Hamburg, Germany
  • A. Azima, H. Biss, M. Drescher, W. Hillert, V. Miltchev, J. Roßbach
    University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
  • S. Khan
    DELTA, Dortmund, Germany
 
  Funding: Work supported by Federal Ministry of Education and Research of Germany under contract No. 05K13GU4, 05K13PE3, and 05K16PEA.
Free-electron lasers (FELs) based on the self-amplified spontaneous emission (SASE) principle generate photon pulses with typically poor longitudinal coherence. FEL seeding techniques greatly improve longitudinal coherence by initiating FEL amplification in a controlled way using coherent light pulses. The sFLASH experiment installed at the FEL user facility FLASH at DESY in Hamburg is dedicated to the study of external seeding techniques. In this paper, the layout of the sFLASH seeding experiment is presented and an overview of recent developments is given.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP076  
About • paper received ※ 30 September 2019       paper accepted ※ 17 October 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP077 Study of a Seeded Oscillator-Amplifier FEL laser, FEL, simulation, free-electron-laser 234
 
  • G. Paraskaki, S. Ackermann, B. Faatz, V. Grattoni, C. Lechner, M. Mehrjoo
    DESY, Hamburg, Germany
  • G. Geloni, S. Serkez, T. Tanikawa
    EuXFEL, Schenefeld, Germany
  • W. Hillert
    University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
 
  In recent years, there is interest of the Free-Electron Laser (FEL) community in external-seeding techniques such as the Echo-Enabled Harmonic Generation (EEHG) and the High-Gain Harmonic Generation (HGHG). With these techniques, pulses of an improved temporal coherence are generated, but at the same time, they are limited by the repetition rates that seed lasers can currently offer with the required pulse energies. A big challenge is to combine the advantages of seeding schemes with high repetition rates. For this purpose, we study a combination of an oscillator-amplifier. The modulator in the oscillator is used at a long wavelength to modulate the electron beam and an amplifier is operated to extract the FEL radiation of the desired harmonic. This way we can use a seed laser of 10 Hz in a burst mode and a resonator to feedback the radiation at repetition rates of superconducting accelerators instead of using an external seed at these high-repetition rates. In this contribution, we present simulation results of a seeded oscillator-amplifier FEL in an HGHG scheme.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP077  
About • paper received ※ 19 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP078 Impact of Electron Beam Energy Chirp on Seeded FELs FEL, laser, simulation, timing 238
 
  • G. Paraskaki, S. Ackermann, B. Faatz, V. Grattoni, C. Lechner, J. Zemella
    DESY, Hamburg, Germany
  • W. Hillert
    University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
 
  Seeded FELs enable the generation of fully coherent, transform-limited and high brightness FEL pulses, as the start-up process is driven by an external coherent light pulse. During the design process of such FELs, it is important to choose carefully the electron beam parameters to guarantee high performance. One of those parameters is the electron beam energy chirp. In this contribution, we show simulation results and we discuss how the electron beam energy chirp affects the final spectrum.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP078  
About • paper received ※ 16 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP079 Status of the Hard X-Ray Self-Seeding Setup at the European XFEL FEL, undulator, radiation, simulation 242
 
  • G. Geloni, S. Karabekyan, D. La Civita, L. Samoylova, S. Serkez, R. Shayduk, H. Sinn, V. Sleziona, M. Vannoni, M. Yakopov
    EuXFEL, Schenefeld, Germany
  • J.W.J. Anton, S.P. Kearney, D. Shu
    ANL, Lemont, Illinois, USA
  • V.D. Blank, S. Terentiev
    TISNCM, Troitsk, Russia
  • W. Decking, V. Kocharyan, S. Liu, E. Negodin, E. Saldin, T. Wohlenberg
    DESY, Hamburg, Germany
  • X. Dong
    European X-Ray Free-Electron Laser Facility GmbH, Schelefeld, Germany
 
  A Hard X-Ray Self-Seeding (HXRSS) setup will be soon commissioned at the European XFEL. It relies on a two-chicanes scheme to deal, in particular, with the high pulse repetition rate of the facility. In this contribution we review the physics choices made at the design stage and the expected performance of the setup. We will also focus on the description of the hardware installations made at the SASE2 line of the European XFEL.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP079  
About • paper received ※ 27 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP080 Harmonic Off-Axis Seeding at the DELTA Short-Pulse Source laser, undulator, radiation, polarization 246
 
  • A. Meyer auf der Heide, B. Büsing, S. Khan, D. Krieg, C. Mai
    DELTA, Dortmund, Germany
 
  Funding: Work supported by the BMBF (05K16PEA, 05K16PEB), MERCUR (Pr-2014-0047), DFG (INST 212/236-1 FUGG) and the state of NRW
At the 1.5-GeV synchrotron light source DELTA operated by the TU Dortmund University, a short-pulse source employs the coherent harmonic generation (CHG) scheme. Here, a laser pulse interacts with a stored electron bunch forming a microbunching structure to generate ultrashort synchrotron light pulses at harmonics of the laser wavelength. As an upgrade of the short-pulse facility, the echo-enabled harmonic generation (EEHG) scheme will be implemented, which requires a second laser-electron interaction to yield much higher harmonics compared to CHG. In a study towards twofold laser seeding, the possibility of seeding at undulator harmonics with a crossing angle between laser and electron beam was investigated.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP080  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP083 Energy Spread Impact on HGHG and EEHG FEL Pulse Energy laser, FEL, bunching, photon 250
 
  • S. Spampinati, E. Allaria, L. Giannessi, P. Rebernik Ribič
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • L. Giannessi
    ENEA C.R. Frascati, Frascati (Roma), Italy
  • P. Rebernik Ribič
    University of Nova Gorica, Nova Gorica, Slovenia
 
  VUV and X-ray free electron lasers (FELs) require a very bright electron beam. Seeded FEL harmonic generation is particularly sensible to energy spread and slice energy spread can limit the highest harmonic conversion factor at which coherent radiation can be produced. Different cas-cade schemes can have different sensibility to the slice energy spread. At FERMI we have evaluated the impact of the slice energy spread on the performance of high gain harmonic generation (HGHG) and of echo enable harmonic generation (EEHG) by measuring the FEL pulse energy as function of the electron beam slice energy spread. The measurements were done at different harmon-ics. The slice energy spread was varied trough the laser heater located in the linac that drives FERMI.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP083  
About • paper received ※ 20 August 2019       paper accepted ※ 17 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP087 Start-to-end Simulations of the Reflection Hard X-Ray Self-Seeding at the SHINE Project FEL, undulator, photon, simulation 254
 
  • T. Liu, X. Dong, C. Feng
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
 
  The Shanghai high repetition rate XFEL and extreme light Facility (SHINE) project is designed to produce fully coherent X-ray photons covering the photon energy from 3 keV to 25 keV. We have reported our FEL proposal and schemes in the hard X-ray regime which is self-seeding based on the crystal monochromator previously. Comparing to the transmission self-seeding scheme, the reflection one has several advantages and might be the base proposal. Start-to-end (S2E) simulations from the beam generation by Astra, the linac accelerating by Elegant to the FEL simulation by Genesis are performed. In this manuscript, the FEL simulations based on the S2E beam will be presented mainly. The results demonstrate the feasibility of the reflection hard X-ray self-seeding at the SHINE project.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP087  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP088 Numerical Simulations for Generating Fully Coherent Soft X-Ray Free Electron Lasers With Ultra-Short Wavelength laser, radiation, FEL, free-electron-laser 258
 
  • K.S. Zhou, H.X. Deng, B. Liu, D. Wang
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
 
  For the fully coherent, ultra-short and high power soft X-rays are becoming key instruments in many different research fields, such as biology, chemistry or physics. However, it’s hard to generate this kind of advanced light source by the conventional lasers, especially for the soft X-rays with ultra-short wavelength because of no suitable reflectors. The external seeded free electron laser (FEL) is considered as one feasible method. Here, we give an example to generate highly temporal coherent soft X-rays with the wavelength 1 nm by the two-stage cascaded schemes. EEHG scheme is used as the first-stage while the HGHG scheme is used as the second-stage.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP088  
About • paper received ※ 20 August 2019       paper accepted ※ 22 October 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP090 Considerations on Implementing EEHG with a Strong Linear Chirp laser, FEL, simulation, bunching 262
 
  • M.A. Pop, F. Curbis, W. Qin, S. Werin
    MAX IV Laboratory, Lund University, Lund, Sweden
  • F. Curbis, S. Werin
    SLF, Lund, Sweden
  • W. Qin
    Lund University, Lund, Sweden
 
  Funding: The work is supported by Knut and Alice Wallenberg foundation.
The Soft X-ray Laser (SXL) currently being studied at MAX IV Laboratory is envisioned to produce coherent radiation in the 1-5 nm wavelength range. In this contribution, we present the results of simulations aimed at adding to the SXL an Echo Enabled Harmonic Generation scheme, which has been shown to increase the coherence of FELs in the Soft X-ray regime. Our work puts special emphasis on accommodating the positive energy chirp of the electron bunch coming out of the MAX IV Linac and on generating sufficient bunching at the high harmonics necessary for covering the full wavelength range.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP090  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUP091 Start-to-End Simulation of the NSRRC Seeded VUV FEL FEL, laser, undulator, simulation 266
 
  • S.Y. Teng
    NTHU, Hsinchu, Taiwan
  • C.H. Chen, W.K. Lau, A.P. Lee
    NSRRC, Hsinchu, Taiwan
 
  A free electron laser (FEL) driven by a high brightness electron linac system has been proposed to generate ultrashort intense coherent radiation in the vacuum ultraviolet region. It is a third harmonic high-gain high harmonic generation (HGHG) FEL for generation of VUV radiation with wavelength at 66.7 nm from a 20-mm period length helical undulator. A 200-nm seed laser is used for beam energy modulation in a 10-periods helical undulator of 24-mm period length. A small chicane is placed between the two undulators to optimize power growth in the radiator. In this study, we perform start-to-end simulation to foresee the operational performance of the test facility and preliminary results are presented.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUP091  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUD03 Fine and Hyperfine Structure of FEL Emission Spectra FEL, radiation, laser, experiment 276
 
  • V.V. Kubarev, Ya.V. Getmanov, O.A. Shevchenko
    BINP SB RAS, Novosibirsk, Russia
  • S. Bae, Y.U. Jeong
    KAERI, Daejon, Republic of Korea
 
  This paper presents the results of experimental investigations of the fine and hyperfine spectral structures of the Novosibirsk free-electron laser (NovoFEL) and the compact free-electron laser of the Korea Atomic Energy Research Institute (KAERI FEL) by means of the optimal instruments, resonance Fabry-Perot interferometers. The very high coherence of the NovoFEL spectrum was measured in regimes with one pulse circulating inside its optical resonator (the coherence length is 7 km, and the relative width of the hyperfine structure lines is 2E-8) and with total absence of coherence between two circulating pulses, i.e. the fine structure. Sixty pulses circulate simultaneously inside the KAERI FEL optical resonator, and the measured coherence length on average covers ten pulses (the coherence length is 1 m; the relative width of the fine structure lines is 10-4).  
slides icon Slides TUD03 [3.177 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUD03  
About • paper received ※ 16 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUD04 Cavity-Based Free-Electron Laser Research and Development: A Joint Argonne National Laboratory and SLAC National Laboratory Collaboration FEL, cavity, undulator, laser 282
 
  • G. Marcus, F.-J. Decker, G.L. Gassner, A. Halavanau, J.B. Hastings, Z. Huang, Y. Liu, J.P. MacArthur, R.A. Margraf, T.O. Raubenheimer, A. Sakdinawat, T.-F. Tan, D. Zhu
    SLAC, Menlo Park, California, USA
  • J.W.J. Anton, L. Assoufid, K. Goetze, W.G. Jansma, S.P. Kearney, K. Kim, R.R. Lindberg, A. Miceli, X. Shi, D. Shu, Yu. Shvyd’ko, J.P. Sullivan, M. White
    ANL, Lemont, Illinois, USA
  • B. Lantz
    Stanford University, Stanford, California, USA
 
  One solution for producing longitudinally coherent FEL pulses is to store and recirculate the output of an amplifier in an X-ray cavity so that the X-ray pulse can interact with following fresh electron bunches over many passes. The X-ray FEL oscillator (XFELO) and the X-ray regenerative amplifier FEL (XRAFEL) concepts use this technique and rely on the same fundamental ingredients to realize their full capability. Both schemes require a high repetition rate electron beam, an undulator to provide FEL gain, and an X-ray cavity to recirculate and monochromatize the radiation. The shared infrastructure, complementary performance characteristics, and potentially transformative FEL properties of the XFELO and XRAFEL have brought together a joint Argonne National Laboratory (ANL) and SLAC National Laboratory (SLAC) collaboration aimed at enabling these schemes at LCLS-II. We present plans to install a rectangular X-ray cavity in the LCLS-II undulator hall and perform experiments employing 2-bunch copper RF linac accelerated electron beams. This includes performing cavity ring-down measurements and 2-pass gain measurements for both the low-gain XFELO and the high-gain RAFEL schemes.  
slides icon Slides TUD04 [12.425 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUD04  
About • paper received ※ 25 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUT01 Superradiance and Stimulated-Superradiant Emission of Bunched Electron Beams radiation, wiggler, FEL, undulator 288
 
  • A. Gover, R. Ianconescu
    University of Tel-Aviv, Faculty of Engineering, Tel-Aviv, Israel
  • C. Emma, P. Musumeci, C. Pellegrini, N.S. Sudar
    UCLA, Los Angeles, USA
  • A. Friedman
    Ariel University, Ariel, Israel
  • R. Ianconescu
    Shenkar College of Engineering and Design, Ramat Gan, Israel
 
  Funding: We acknowledge support of the Israel Science Foundation and the German Israeli Projects Foundation (DIP).
We outline the fundamental processes of coherent radiation emission from a bunched charged particles beam [1]. In contrast to spontaneous emission of radiation from a random electron beam that is proportional to the number of particles N, a pre-bunched electron beam emits spontaneously coherent radiation proportional to N2 through the process of (spontaneous) superradiance (SP-SR) (in the sense of Dicke’s [2]). The SP-SR emission of a bunched electron beam can be even further enhanced by a process of stimulated-superradiance (ST-SR) in the presence of a seed injected radiation field. These coherent radiation emission processes are presented in term of a radiation mode expansion model, applied to general free electron radiation schemes: Optical-Klystron, HGHG, EEHG, and coherent THz sources based on synchrotron radiation, undulator radiation or Smith-Purcell radiation. The general model of coherent spontaneous emission is also extended to the nonlinear regime - Tapering Enhanced Stimulated Superradiance (TESSA) [3], and related to the tapered wiggler section of seed-injected FELs. In X-Ray FELs these processes are convoluted with other effects, but they are guidelines for strategies of wiggler tapering efficiency enhancement.
[1] A. Gover et al., Rev. Mod. Phys. https://arxiv.org/abs/1810.07566v3 (2019)
[2] R. H. Dicke, Physical Review 93, 99 (1954)
[3] N. Sudar et al., P.R.L. 117, 174801 (2016)
 
slides icon Slides TUT01 [11.391 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-TUT01  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEA01 Overview of CW RF Guns for Short Wavelength FELs gun, cathode, FEL, SRF 290
 
  • H.J. Qian
    DESY Zeuthen, Zeuthen, Germany
  • E. Vogel
    DESY, Hamburg, Germany
 
  Hard X-ray FELs (XFELs) operating with pulsed RF provide unprecedented peak brilliance for scientific research. Operating the accelerators with CW RF improves the flexibility w.r.t. the available time structure for experiments and opens the next frontier of average brilliance. One of the challenges of CW XFELs is the electron source, which requires both CW operation and highest possible beam quality allowing lasing at shortest wavelengths. The CW mode technically constraints the gun acceleration gradient, which is one of the keys to electron source brightness, so R&D is devoted to CW gun improvements since decades. In this contribution, the worldwide development status of CW RF guns, both normal conducting and superconducting, is reviewed.  
slides icon Slides WEA01 [16.329 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEA01  
About • paper received ※ 25 August 2019       paper accepted ※ 07 November 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEA04 Growing and Characterization of Cs2Te Photocatodes with Different Thicknesses at INFN LASA cathode, gun, diagnostics, FEL 297
 
  • L. Monaco, P. Michelato, D. Sertore
    INFN/LASA, Segrate (MI), Italy
  • G. Guerini Rocco, C. Pagani
    Università degli Studi di Milano & INFN, Segrate, Italy
 
  The INFN LASA group has a long standing experience in the production of cesium telluride photocathodes for high brightness photoinjectors. The well-established recipe relies on the deposition of a typical amount of 10 nm of Te, followed by the Cs deposition until reaching the maximum QE. Nevertheless, for improving the understanding of photocathode properties, we are investigating the effect of Te thickness on the growing process, evaluating photocathode optical properties and quantum efficiency during the growing process and on the final film. These photocathodes will be then operated and analyzed in the real environment of the RF Gun at the PITZ facility in DESY Zeuthen, to estimate their impact on the electron beam properties.  
slides icon Slides WEA04 [15.703 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEA04  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEB01 Identification and Mitigation of Smoke-Ring Effects in Scintillator-Based Electron Beam Images at the European XFEL FEL, diagnostics, experiment, ECR 301
 
  • G. Kube, S. Liu, A.I. Novokshonov, M. Scholz
    DESY, Hamburg, Germany
 
  Standard transverse beam profile measurements at the European XFEL are based on scintillating screen monitors using LYSO:Ce. While it is possible to resolve beam sizes down to a few micrometers with this scintillator, the experience during the XFEL commissioning showed that the measured emittance values were significantly larger than the expected ones. In addition, beam profiles measured at bunch charges of a few hundred pC showed a ’smoke ring’ structure. While coherent OTR emission and beam dynamical influence can be excluded, it is assumed that the profile distortions are caused by effects from the scintillator material. Following the experience in high energy physics, a simple model was developed which takes into account quenching effects of excitonic carriers inside a scintillator in a heuristic way. Based on this model, the observed beam profiles can be understood qualitatively. Together with the model description, first comparisons with experimental results will be shown. Possible new scintillator materials suitable for beam profile diagnostics and first test results from beam measurements will be presented.  
slides icon Slides WEB01 [5.057 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEB01  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEB02 Wire-Scanners with Sub-Micrometer Resolution: Developments and Measurements FEL, experiment, operation, emittance 307
 
  • G.L. Orlandi, S. Borrelli, Ch. David, E. Ferrari, V. Guzenko, B. Hermann, O. Huerzeler, R. Ischebeck, C. Lombosi, C. Ozkan Loch, E. Prat
    PSI, Villigen PSI, Switzerland
  • N. Cefarin, S. Dal Zilio, M. Lazzarino
    IOM-CNR, Trieste, Italy
  • M. Ferianis, G. Penco, M. Veronese
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
 
  Monitors of the beam transverse profile with ever more demanding spatial resolution and minimal invasivity are required by the FEL community. In order to improve the spatial resolution towards the sub-micrometer limit as well as to decrease the impact on the lasing process, nano-fabricated wire-scanners have been manufactured independently at PSI and FERMI by means of a lithographic technique [1,2]. Experimental tests carried out at SwissFEL at a low emittance demonstrated the capability of such innovative wire-scanner solutions to resolve beam transverse profiles with a size of 400-500 nm without being affected by any resolution limit. Status and outlook of nano-fabricated wire-scanners will be presented.
[1] M. Veronese et al., NIM-A, 891, 32-36, (2018).
[2] S. Borrelli et al., Comm. Phys.-Nature, 1, 52 (2018).
 
slides icon Slides WEB02 [11.196 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEB02  
About • paper received ※ 24 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEB04 Few-Femtosecond Facility-Wide Synchronization of the European XFEL laser, FEL, FEM, timing 318
 
  • S. Schulz, M.K. Czwalinna, M. Felber, M. Fenner, C. Gerth, T. Kozak, T. Lamb, B. Lautenschlager, F. Ludwig, U. Mavrič, J. Müller, S. Pfeiffer, H. Schlarb, Ch. Schmidt, C. Sydlo, M. Titberidze, F. Zummack
    DESY, Hamburg, Germany
 
  The first facility-wide evaluation of the optical synchronization system at the European XFEL resulted in excellent arrival time stability of the electron bunches at the end of the 2 km long linac, being measured with two individual adjacent femtosecond-resolution bunch arrival time monitors. While each of the monitors is independently linked by a stabilized optical fiber to a master laser oscillator, with one being installed in the injector area and one in the experimental hall, these two reference lasers are tightly synchronized through another few-km long fiber link. Thus, not only the accelerator performance is being benchmarked, but equally the optical synchronization infrastructure itself. Stability on this level can only be achieved by locking the RF for cavity field control to the optical reference and requires an unprecedented synchronization of the master laser oscillator to the main RF oscillator, enabled by a novel RF/optical phase detector. Finally, with the seeders of the experiment’s optical lasers synchronized to the master laser oscillator, first experiments at two independent scientific instruments proved an X-ray/optical timing jitter of few tens of femtoseconds.  
slides icon Slides WEB04 [22.142 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEB04  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP003 Balanced Optical-Microwave Phase Detector for 800-nm Pulsed Lasers with Sub-Femtosecond Resolution laser, detector, timing, operation 322
 
  • K. Şafak, A. Berlin, E. Cano Vargas, H.P.H. Cheng, A. Dai, J. Derksen, M. Neuhaus, P. Schiepel
    Cycle GmbH, Hamburg, Germany
  • F.X. Kärtner
    Deutsches Elektronen Synchrotron (DESY) and Center for Free Electron Science (CFEL), Hamburg, Germany
 
  Novel light-matter interaction experiments conducted in free-electron lasers, ultrafast electron diffraction instruments and extreme light infrastructures require synchronous operation of microwave sources with femtosecond pulsed lasers [1]. In particular, Ti:sapphire lasers have become the most common near-infrared light source used in these facilities due to their wide-range tunability and their ability to generate ultrashort pulses at around 800-nm optical wavelength [2]. Therefore, a highly sensitive optical-to-microwave phase detector operating at 800 nm is an indispensable tool to synchronize these ubiquitous lasers to the microwave clocks of these facilities. Electro-optic sampling is one approach that has proven to be the most precise in extracting the relative phase noise between microwaves and optical pulse trains. However, their implementation at 800-nm wavelength has been so far limited [3]. Here, we show a balanced optical-microwave phase detector designed for 800-nm operation based on electro-optic sampling. The detector has a timing resolution of 0.01 fs RMS for offset frequencies above 100 Hz and a total noise floor of less than 10 fs RMS integrated from 1 Hz to 1 MHz.
[1] M. Xin, K. Shafak and F. X. Kärtner, Optica, vol. 5, no. 12, pp. 1564-1578, 2018.
[2] H. Yang et al., Scientific Reports, vol. 7, no. 39966, 2017.
[3] M. Titberidze, DESY-THESIS-2017-040, 2017.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP003  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP004 Timing Stability Comparison Study of RF Synthesis Techniques timing, laser, FEM, FEL 325
 
  • E. Cano Vargas, F.X. Kärtner
    Deutsches Elektronen Synchrotron (DESY) and Center for Free Electron Science (CFEL), Hamburg, Germany
  • A. Berlin, H.P.H. Cheng, A. Dai, J. Derksen, P. Schiepel, K. Şafak
    Cycle GmbH, Hamburg, Germany
 
  Funding: Deutsches Elektronen-Synchrotron (DESY); Cycle GmbH.
High-precision and low-noise timing transfer from a master clock to different end stations of a free-electron laser (FEL) is an essential task.[1] Timing precisions ranging from few tens of femtoseconds to sub-femtoseconds are required for seeded FELs and attosecond science centers. Mode-locked lasers referenced to RF standards are commonly used as master oscillators, due to their superior stability and timing precision, depicting timing jitter in the attosecond range.[2] In this matter, one of the biggest challenges is to transfer the timing stability of mode-locked lasers to RF sources. Here, we compare and contrast two of the most common techniques used for laser-to-RF synthesis in FEL facilities: (i) RF signal extraction from the optical pulse train using photodiodes, and (ii) VCO-to-laser synchronization. Test setups are built to measure both the absolute phase noise of the generated RF signal and the relative timing jitter with respect to the mode-locked laser. Short-term timing jitter values varying between 10 and 100 fs are achieved for different test setups, while long term timing drift ranging to some hundreds of fs due to environmental influence are observed.
[1] M. Xin, K. Shafak and F.X. Kärtner, Optica, vol. 5, no. 12, pp. 1564-1578, 2018.
[2] J. Kim, F.X. Kärtner, Opt. Lett., vol. 32, pp. 3519-3521, 2007.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP004  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP006 A PolariX TDS for the FLASH2 Beamline emittance, photon, FEL, optics 328
 
  • F. Christie, J. Rönsch-Schulenburg, M. Vogt
    DESY, Hamburg, Germany
 
  Transverse Deflecting RF-Structures (TDS) are successfully used for longitudinal diagnostic purposes at many Free-Electron Lasers (FEL) (LCLS, FLASH, EU-XFEL, FERMI). Moreover, by installing a TDS downstream of the FEL undulators and placing the measurement screen in a dispersive section, the temporal photon pulse structure can be estimated, as was demonstrated at LCLS and sFLASH. Here we describe the installation of a variable polarization X-band structure (PolariX TDS [1]) downstream of the FLASH2 undulators. The installation of such a TDS enables longitudinal phase space measurements and photon pulse reconstructions, as well as slice emittance measurements in both planes using the same cavity due to the unique variable polarization of the PolariX TDS.
[1] P. Craievich et al., "Status of the PolariX-TDS Project", in Proc. IPAC’18, Vancouver, Canada (2018)
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP006  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP007 Usage of the MicroTCA.4 Electronics Platform for Femtosecond Synchronization Systems laser, FEL, controls, timing 332
 
  • M. Felber, E.P. Felber, M. Fenner, T. Kozak, T. Lamb, J. Müller, K.P. Przygoda, H. Schlarb, S. Schulz, C. Sydlo, M. Titberidze, F. Zummack
    DESY, Hamburg, Germany
 
  At the European XFEL and FLASH at DESY optical synchronization systems are installed providing sub-10 femtosecond electron bunch arrival time stability and laser oscillator synchronization to carry out time-resolved pump-probe experiments with high precision. The synchronization system supplies critical RF stations with short- and long-term phase-stable reference signals for precise RF field detection and control while bunch arrival times are processed in beam-based feedbacks to further time-stabilize the FEL pulses. Experimental lasers are tightly locked to the optical reference using balanced optical cross-correlation. In this paper, we describe the electronic hardware for supervision and real-time control of the optical synchronization system. It comprises various MicroTCA.4 modules including fast digitizers, FPGA processor boards, and drivers for piezos and stepper-motors. Advantages of the system are the high-level of integration, state-of-the-art performance, flexibility, and remote maintainability.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP007  
About • paper received ※ 20 August 2019       paper accepted ※ 26 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP008 Multi-Beamline Operation at the European XFEL FEL, kicker, timing, undulator 335
 
  • L. Fröhlich, A. Aghababyan, V. Balandin, B. Beutner, F. Brinker, W. Decking, N. Golubeva, O. Hensler, Y. Janik, R. Kammering, H. Kay, T. Limberg, S. Liu, D. Nölle, F. Obier, M. Omet, M. Scholz, T. Wamsat, T. Wilksen, J. Wortmann
    DESY, Hamburg, Germany
 
  The European XFEL uses a unique beam distribution scheme to direct electron bunches to its three undulator lines. The accelerator delivers up to 600 microsecond long bunch trains, out of which parts or individual bunches can be selected for photon production in any of the FELs. This contribution gives a brief overview of the kicker-septum scheme facilitating this and highlights how even complex bunch patterns can easily be configured via the timing system.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP008  
About • paper received ※ 19 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP011 Longitudinal Intra-Train Beam-Based Feedback at FLASH feedback, cavity, controls, laser 346
 
  • S. Pfeiffer, L. Butkowski, M.K. Czwalinna, B. Dursun, C. Gerth, B. Lautenschlager, H. Schlarb, Ch. Schmidt
    DESY, Hamburg, Germany
 
  The longitudinal intra-train beam-based feedback has been recommissioned after major upgrades on the synchronization system of the FLASH facility. Those upgrades include: new bunch arrival time monitors (BAMs), the optical synchronization system accommodating the latest European XFEL design based on PM fibers, and installation of a small broadband normal conducting RF cavity. The cavity is located prior to the first bunch compressor at FLASH and allows energy modulation bunch-by-bunch (1 us spacing) on the per mille range. Through the energy dependent path length of the succeeding magnetic chicane the cavity is used for ultimate bunch arrival time corrections. Recently the RF cavity operated 1 kW pulsed solid-state amplifier was successfully commissioned. First tests have been carried out incorporating the fast cavity as actuator together with SRF stations for larger corrections in our intra-train beam-based feedback pushing now arrival time stabilities towards 5 fs (rms). The latest results and observed residual instabilities are presented.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP011  
About • paper received ※ 20 August 2019       paper accepted ※ 17 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP012 THz Spectroscopy with MHz Repetition Rates for Bunch Profile Reconstructions at European XFEL flattop, radiation, FEL, undulator 350
 
  • N.M. Lockmann, C. Gerth, B. Schmidt, S. Wesch
    DESY, Hamburg, Germany
 
  The European X-ray Free-Electron Laser generates most powerful and brilliant X-ray laser pulses. Exact knowledge about the longitudinal electron bunch profile is crucial for the operation of the linear accelerator as well as for photon science experiments. The only longitudinal diagnostic downstream of the main linac is based on spectroscopy of diffraction radiation (DR). The spectral intensity of the DR in the THz and infrared regime is monitored by a four-staged grating spectrometer and allows non-invasive bunch length characterization based on form factor measurements in the range 0.7 - 60 THz. As the readout and signal shaping electronics of the spectrometer allow MHz readout rates, the longitudinal bunch profile of all bunches inside the bunch train can be characterized non-invasively and simultaneously to FEL operation. In this paper, form factor measurements along the bunch train will be described and presented as well as the resulting reconstructed current profiles.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP012  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP015 Electro-Optical Bunch Length Detection at the European XFEL laser, photon, FEL, detector 360
 
  • B. Steffen, M.K. Czwalinna, C. Gerth
    DESY, Hamburg, Germany
  • S. Bielawski, C. Evain, E. Roussel, C. Szwaj
    PhLAM/CERCLA, Villeneuve d’Ascq Cedex, France
 
  The electro-optical bunch length detection system based on electro-optic spectral decoding has been installed and is being commissioned at the European XFEL. The system is capable of recording individual longitudinal bunch profiles with sub-picosecond resolution at a bunch repetition rate of 1.13MHz . Bunch lengths and arrival times of entire bunch trains with single-bunch resolution have been measured as well as jitter and drifts for consecutive bunch trains. In addition, we are testing a second electro-optical detection strategy, the so-called photonic time-stretching, which consists of imprinting the electric field of the bunch onto a chirped laser pulse, and then "stretching" the output pulse by optical means. As a result, we obtain is a slowed down "optical replica" of the bunch shape, which can be recorded using a photodiode and GHz-range acquisition. These tests are performed in parallel with the existing spectral decoding technique based on a spectrometer in order to allow a comparative study. In this paper, we present first results for both detection strategies from electron bunches after the second bunch compressor of the European XFEL.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP015  
About • paper received ※ 24 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP016 Precise Laser-to-RF Synchronization of Photocathode Lasers laser, timing, controls, experiment 364
 
  • M. Titberidze, M. Felber, T. Kozak, T. Lamb, J. Müller, H. Schlarb, S. Schulz, C. Sydlo, F. Zummack
    DESY, Hamburg, Germany
 
  RF photo-injectors are used in various large, mid and small-scale accelerator facilities such as X-ray Free Electron Lasers (XFELs), external injection-based laser-driven plasma accelerators (LPAs) and ultrafast electron diffraction (UED) sources. Many of these facilities require a high precision synchronization of the photo-injector laser system, either because of beam dynamics reasons or the photo-injector directly impacting pump-probe experiments carried out to study physical processes on femtosecond timescales. It is thus crucial to achieve synchronization in the order of 10 fs rms or below between the photocathode laser and the RF source driving the RF gun. In this paper, we present the laser-to-RF synchronization setup employed to lock a commercial near-infrared (NIR) photocathode laser oscillator to a 2.998 GHz RF source. Together with the first results achieving ~ 10 fs rms timing jitter in the measurement bandwidth from 10 Hz up to 1 MHz, we describe an advanced synchronization setup as a future upgrade, promising even lower timing jitter and most importantly long-term timing drift stability.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP016  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP019 Concept of a Novel High-Bandwidth Arrival Time Monitor for Very Low Charges as a Part of the All-Optical Synchronization Systems at XFEL and FLASH pick-up, laser, FEL, free-electron-laser 368
 
  • A. Penirschke
    THM, Friedberg, Germany
  • W. Ackermann
    TEMF, TU Darmstadt, Darmstadt, Germany
  • M.K. Czwalinna, H. Schlarb
    DESY, Hamburg, Germany
 
  Funding: This work is supported by the German Federal Ministry of Education and Research (BMBF) under contract no. 05K19RO1.
Numerous advanced applications of X-ray free-electron lasers require pulse durations and time resolutions in the order of only a few femtoseconds or better. The generation of these pulses to be used in time-resolved experiments require synchronization techniques that can simultaneously lock all necessary components to a precision in the range of 1 fs only. To improve the experimental conditions at existing facilities and enable future development of seeded FELs, a new all-optical synchronization system at FLASH and XFEL was implemented, which is based on pulsed optical signals rather than electronic RF signals. In collaboration with DESY, Hamburg the all-optical synchronization system is used to ensure a timing stability on the 10 fs scale at XFEL. For a future ultra-low charge operation mode down to 1 pC at XFEL an overall synchronization of (5+1)fs r.m.s. or better is necessary. This contribution presents a new concept for a ultra-wideband pick-up structure for beampipe diameters down to 10 mm for frequencies up to 100 GHz or higher and at the same time providing sufficient output signal for the attached EOMs.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP019  
About • paper received ※ 23 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP024 1.3 GHz Solid State Power Amplifier for the Buncher in CTFEL Facility experiment, FEL, cavity, bunching 371
 
  • T.H. He, C.L. Lao, P. Li, X. Luo, L.J. Shan, K. Zhou
    CAEP/IAE, Mianyang, Sichuan, People’s Republic of China
 
  The THz Free Electron Laser facility (CAEP THz FEL, CTFEL) of the China Academy of Engineering Physics uses high quality electron beams to generate high average power terahertz radiations. A 1.3 GHz RF buncher is used in front of the superconducting linear accelerator of the CTFEL facility to improve the electron beams quality. The RF buncher is driven by a solid state power amplifier (SSPA), and the SSPA is feedback controlled by a low level RF (LLRF) control system to ensure the high stability of the amplitude and phase of the bunching field in the buncher cavity. The SSPA operates at 1.3 GHz and outputs 0 to 5 kW of continuous wave power. This paper mainly introduces the principle and composition of the SSPA, and presents some experiments on the RF buncher driven by the SSPA.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP024  
About • paper received ※ 15 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP026 Preliminary Geometry Optimization of a 3.5-Cell SRF Gun Cavity at ELBE Based on Beam Dynamics SRF, gun, cavity, emittance 374
 
  • K. Zhou, P. Li
    CAEP/IAE, Mianyang, Sichuan, People’s Republic of China
  • A. Arnold, S. Ma, J. Schaber, J. Teichert, R. Xiang
    HZDR, Dresden, Germany
 
  At present, ELBE radiation source at HZDR is optimizing the SRF cavity for the next generation ELBE SRF GUN. This paper presents a preliminary study on the geometry optimization of a 3.5-cell SRF gun cavity based on beam dynamics. By changing the lengths of the half cell and the first TESLA like cell, two new cavity models with higher electric field in the half cell are built and their RF fields are compared with SRF GUN I and SRF GUN II. Through the scanning of the RF phases and the electric fields, the simulation results indicate that new models have smaller transverse emittance at relatively lower electric field gradients and better performance on longitudinal emittance than SRF GUN I and SRF GUN II.  
poster icon Poster WEP026 [1.345 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP026  
About • paper received ※ 19 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP027 A Fast and Accurate Method to Shim Undulator Using Multi-Objective GA undulator, MMI, laser, free-electron-laser 378
 
  • L.G. Yan, L.J. Chen, D.R. Deng, P. Li
    CAEP/IAE, Mianyang, Sichuan, People’s Republic of China
 
  Funding: National Natural Science Foundation of China under grant of 11505174, 11505173 and 11605190
GA (Genetic Algorithm) is one of the most excellent methods to search the optimal solution for a problem, which has been applied to solve various problems. It is hard to estimate shim applied on raw undulator precisely. There are many methods have been developed to solve the problem. In this proceeding, we proposed a fast and accurate method to conclude the shim using multi-objective GA. A multi-objective objective function was set, and multi-objective optimization was also implemented. The evolution time is reduced by setting optimal evolution parameters. To demonstrate the method, we also finished some test on a prototype undulator U38. As a result, it can be achieved only by shimming three times that all the parameters of trajectory center deviation, peak-to-peak error and phase error satisfied the requirements.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP027  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP031 Timing Synchronization Activities for Drift-Free Operation of Ultrafast Electron Diffraction System at KAERI timing, laser, gun, detector 385
 
  • J. Shin, J. Kim
    KAIST, Daejeon, Republic of Korea
  • I.H. Baek, Y.U. Jeong, H.W. Kim, K. Oang, S. Park
    KAERI, Daejon, Republic of Korea
 
  Funding: This work is funded by KAERI (Grant number: 525350-19)
Precise timing synchronization of an ultrafast electron diffraction facility is essential requirement for femtosecond resolution structure analysis. Recent studies of THz-based electron deflectors have enabled the timing drift measurement between ultrafast electrons and an optical pump beam with few femtosecond resolution [1]. In this work, we will introduce timing synchronization activities to suppress the drift of an electron beam. As timing drift of the electron beam originates from every sub-element, each timing drift contribution from RF transfer, RF-to-optical synchronization, and optical amplification is measured. Timing drift of RF transfer through coaxial cable, which exposed to temperature fluctuation, is actively stabilized from 2 ps to 50 fs by active feedback loop. Further additive drift from RF-to-optical synchronization is maintained below 100 fs. Also optical drift due to the regenerative amplifier, measured by optical correlator, is maintained below 20 fs over an hour. This work allows ultrafast electron diffraction system to operate with less drift correction procedure and increased user availability.
[1] H. Yang et al., "10-fs-level synchronization of photocathode laser with RF-oscillator for ultrafast electron and X-ray sources", Sci. Rep. 7, 39966 (2017).
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP031  
About • paper received ※ 24 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP035 NIR Spectrometer for Bunch-Resolved, Non-Destructive Studies of Microbunching at European XFEL FEL, laser, bunching, free-electron-laser 392
 
  • S. Fahlström, M. Hamberg
    Uppsala University, Uppsala, Sweden
  • C. Gerth, N.M. Lockmann, B. Steffen
    DESY, Hamburg, Germany
 
  At the European X-ray Free Electron Laser high brilliance femtosecond FEL radiation pulses are generated for user experiments. For this to be achieved electron bunches must be reliably produced within very tight tolerances. In order to investigate the presence of micro-bunching, i.e. charge density variation along the electron bunch with features in the micron range, a prism-based NIR spectrometer with an InGaAs sensor, sensitive in the wavelength range 900 nm to 1700 nm was installed. The spectrometer utilizes diffraction radiation (DR) generated at electron beam energies of up to 17.5 GeV. The MHz repetition rate needed for bunch resolved measurements is made possible by the KALYPSO line detector system, providing a read-out rate of up to 2.7 MHz. We present the first findings from commissioning of the NIR spectrometer, and measurements on the impact of the laser heater system for various bunch compression settings, in terms of amplitude and bunch-to-bunch variance of the NIR spectra as well as FEL pulse energy.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP035  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP036 The PolariX-TDS Project: Bead-Pull Measurements and High-Power Test on the Prototype polarization, FEL, cavity, status 396
 
  • P. Craievich, M. Bopp, H.-H. Braun, A. Citterio, R. Ganter, T. Kleeb, F. Marcellini, M. Pedrozzi, E. Prat, S. Reiche
    PSI, Villigen PSI, Switzerland
  • R.W. Aßmann, F. Christie, R.T.P. D’Arcy, U. Dorda, M. Foese, P. Gonzalez Caminal, M. Hoffmann, M. Hüning, R. Jonas, O. Krebs, S. Lederer, V. Libov, B. Marchetti, D. Marx, J. Osterhoff, M. Reukauff, H. Schlarb, S. Schreiber, G. Tews, M. Vogt, A. Wagner
    DESY, Hamburg, Germany
  • N. Catalán Lasheras, A. Grudiev, G. McMonagle, W.L. Millar, S. Pitman, K.T. Szypula, W. Wuensch, V. del Pozo Romano
    CERN, Meyrin, Switzerland
  • W.L. Millar
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
 
  A collaboration between DESY, PSI and CERN has been established to develop and build an advanced modular X- band transverse deflection structure (TDS) system with the new feature of providing variable polarization of the deflecting force. The prototype of the novel X-band TDS, the Polarizable X-band (PolariX) TDS, was fabricated at PSI following the high-precision tuning-free production process developed for the C-band Linac of the SwissFEL project. Bead-pull RF measurements were also performed at PSI to verify, in particular, that the polarization of the dipole fields does not have any rotation along the structure. The high-power test was performed at CERN and now the TDS is at DESY and has been installed in FLASHForward, where the first streaking experience with beam will be accomplished. We summarize in this paper the status of the project, the results of the bead-pull measurements and the high power test.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP036  
About • paper received ※ 21 August 2019       paper accepted ※ 26 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP038 Commissioning and Stability Studies of the SwissFEL Bunch-Separation System FEL, photon, operation, kicker 404
 
  • M. Paraliev, S. Dordevic, R. Ganter, C.H. Gough, N. Hiller, R.A. Krempaská, D. Voulot
    PSI, Villigen PSI, Switzerland
 
  SwissFEL is a linear electron accelerator based, X-ray Free Electron Laser at the Paul Scherrer Institute, Switzerland. It is a user oriented facility capable of producing short, high brightness X-ray pulses covering the spectral range from 1 to 50 Å. SwissFEL is designed to run in two electron bunch mode in order to serve simultaneously two experimental beamline stations (hard and soft X-ray one) at its full repetition rate. Two closely spaced (28 ns) electron bunches are accelerated in one RF macro pulse up to 3 GeV. A high stability resonant kicker system and a Lambertson septum magnet are used to separate the bunches and to send them to their respective beamlines. With the advancement of the construction of the second beamline (Athos) the bunch-separation system was successfully commissioned. In order to confirm that the beam separation process is fully transparent a stability study of the electron beam and the free electron laser in the main beamline (Aramis) was done.  
poster icon Poster WEP038 [0.945 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP038  
About • paper received ※ 19 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP041 Feasibility of Single-Shot Microbunching Diagnostics for a Pre-Bunched Beam at 266 nm laser, bunching, radiation, diagnostics 408
 
  • A.H. Lumpkin
    AAI/ANL, Lemont, Illinois, USA
  • D.W. Rule
    Private Address, Silver Spring, USA
 
  Funding: Work supported by U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357.
Co-propagating a relativistic electron beam and a high-power laser pulse through a short undulator (modulator) provides an energy modulation which can be converted to a periodic longitudinal density modulation (or microbunching) via the R56 term of a chicane. Such pre-bunching of a beam at the resonant wavelength and the harmonics of a subsequent free-electron laser (FEL) amplifier seeds the process and results in improved gain. We describe potential characterizations of the resulting microbunched electron beams using coherent optical transition radiation (COTR) imaging techniques for transverse size (50 micron), divergence (sub-mrad), trajectory angle (0.1 mrad), spectrum (few nm), and pulse length (sub-ps). The transverse spatial alignment is provided with near-field imaging and the angular alignment is done with far-field imaging and two-foil COTR interferometry (COTRI). Analytical model results for a 266-nm wavelength COTRI case with a 10% microbunching fraction will be presented. COTR gains of 7 million were calculated for an initial charge of 300 pC which enables splitting the optical signal for single-shot measurements of all the cited parameters.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP041  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP043 Multi-Energy Operation Analysis in a Superconducting Linac Based on off-Frequency Detune Method linac, SRF, undulator, acceleration 416
 
  • Z. Zhang, C. Adolphsen, Y. Ding, T.O. Raubenheimer
    SLAC, Menlo Park, California, USA
 
  The free-electron laser facilities driven by a superconducting radio-frequency (SRF) linac provide high-repetition-rate electron beam, which makes it feasible to feed multiple undulator lines at the same time. In this paper, we study a method of controlling the beam energy of multiple electron bunches by off-frequency detuning of the SRF linac. Based on the theoretical analysis, we present the optimal solutions of the method and the strategy to allocate linac energy for each possible off-frequency detune. The initial acceleration phases before detuning of the SRF linac can be optimized to reduce the necessary SRF linac energy overhead. We adopt the LCLS-II-HE configuration as an example to discuss possible schemes for two undulator lines.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP043  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP046 The European XFEL Photocathode Laser laser, FEL, cathode, controls 423
 
  • L. Winkelmann, A. Choudhuri, U. Grosse-Wortmann, I. Hartl, C. Li, C. Mohr, J. Müller, F. Peters, S. Pfeiffer, S.H. Salman
    DESY, Hamburg, Germany
 
  We present the Yb:fiber, Nd:YVO4 laser used to generate electrons from the RF photocathode gun at the European XFEL. The laser provides deep UV output pulses in 600 µs bursts with variable internal repetition rate (564 kHz to 4.5 MHz). Due to its robust architecture (mode-locked and synchronized fiber oscillator, Yb:fiber amplifiers and Nd:YVO4 gain blocks), the laser has operated with >99% uptime since January 2017. Using this laser, the XFEL reported energies of 17.5 GeV in July 2018, and simultaneous multi-mJ lasing in its three SASE beamlines. The laser offers two parallel outputs (1064 nm) with single pulse energies of >100 µJ and 11 ps width (FWHM). One output is converted to deep UV with efficiencies > 25%, and the second is used as a laser heater to reduce microbunching instabilities to increase SASE efficiency. Several state-of-art laser controls were implemented, including feed-forward algorithm to flatten electron charge along the bunch, active beam stabilization with < ±10 µm jitter at the photocathode, state machines for hands-off end-user operation, and temporal pulse synchronization and drift compensation to the timing jigger of the electron bunches to less than 45 fs.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP046  
About • paper received ※ 23 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP048 FLASH Photoinjector Laser Systems laser, operation, free-electron-laser, cathode 430
 
  • S. Schreiber, C. Grün, K. Klose, J. Rönsch-Schulenburg, B. Steffen
    DESY, Hamburg, Germany
 
  The free-electron laser facility FLASH at DESY (Hamburg, Germany) operates two undulator beamlines simultaneously for FEL operation and a third for plasma acceleration experiments (FLASHForward). The L-band superconducting technology allows accelerating fields of up to 0.8 ms in length at a repetition rate of 10 Hz (burst mode). A fast kicker-septum system picks one part of the 1 MHz electron bunch train and kicks it to the second beamline such that two beamlines are operated simultaneously with the full repetition rate of 10 Hz. The photoinjector operates three laser systems. They have different pulse durations and transverse shapes and are chosen to serve best for the given user experiment in terms of electron bunch charge, bunch compression, and bunch pattern. It is also possible to operate the laser systems on the same beamline to provide specific double pulses for certain type of experiments.  
poster icon Poster WEP048 [2.642 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP048  
About • paper received ※ 26 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP050 Status of Chirped Pulse Laser Shaping for the PITZ Photoinjector laser, flattop, optics, simulation 437
 
  • C. Koschitzki, Y. Chen, J.D. Good, M. Groß, M. Krasilnikov, G. Loisch, R. Niemczyk, F. Stephan
    DESY Zeuthen, Zeuthen, Germany
  • E. Khazanov, S. Mironov
    IAP/RAS, Nizhny Novgorod, Russia
  • T. Lang, L. Winkelmann
    DESY, Hamburg, Germany
 
  The beam emittance at FEL facilities like European XFEL and FLASH is dominated by the emittance sources in the electron injector. Shaping of the laser pulses that are employed to release electrons from the cathode of a photo injector, was shown in theory to allow improved beam emittance starting from the electron emission process. At the photo injector test facility at DESY in Zeuthen (PITZ) a laser system capable of controlling the temporal and spatial profile of laser pulses is being set up to demonstrate the predicted emittance reduction experimentally. The presentation will show its current capabilities to provide temporally and spatially shaped laser pulses from a pulse shaper operating at infrared (IR) wavelengths. Furthermore, results from a shape preserving conversion into fourth harmonic ultra-violet (UV), as needed for the photo emission process, will be presented.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP050  
About • paper received ※ 21 August 2019       paper accepted ※ 17 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP053 Development of a Multialkali Antimonide Photocathode at INFN LASA cathode, laser, gun, site 448
 
  • S.K. Mohanty
    DESY Zeuthen, Zeuthen, Germany
  • G. Guerini Rocco, C. Pagani
    Università degli Studi di Milano & INFN, Segrate, Italy
  • P. Michelato, L. Monaco, D. Sertore
    INFN/LASA, Segrate (MI), Italy
 
  Owing to their excellent properties including high quantum efficiency (QE), low emittance, good lifetime and fast response, alkali antimonides photocathodes has been considered as one of the eminent candidates for the electron source of energy recovery linacs (ERL) and free electron lasers (FEL). Nevertheless, their sensitivity to vacuum condition requires specific R&D before they can operate in a RF Gun. For this reason, we have started to develop specifically K-Cs-Sb based multialkali photocathodes at INFN LASA. The primary goal is to develop a stable and reproducible alkali antimonide films on INFN plugs and test them in the photoinjector test facility PITZ at DESY Zeuthen. In this report, we present and discuss about the results so far obtained on KCsSb material and the status of the new preparation system specifically designed for these sensitive materials.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP053  
About • paper received ※ 08 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP057 Performance Optimization of Low-Emittance DC-SRF Injector Using Cs2Te Photocathode emittance, cavity, SRF, solenoid 463
 
  • S. Zhao
    Peking University, Beijing, People’s Republic of China
  • S. Huang, K.X. Liu, Y.Q. Liu, D.M. Ouyang
    PKU, Beijing, People’s Republic of China
 
  A low-emittance DC-SRF injector (DC-SRF-II) is under construction at Peking University, in the earlier design of which K2CsSb photocathode was chosen. Recently we changed the cathode to Cs2Te, which is more widely used nowadays, and carried out a detailed performance optimization. In this paper, we present our latest simulation results, which show that an emittance under 0.5 mm-mrad can be achieved at the bunch charge of 100 pC.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP057  
About • paper received ※ 14 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP058 Drive Laser Temporal Shaping Techniques for Shanghai Soft X-Ray Free Electron Laser laser, FEL, cathode, flattop 466
 
  • X.T. Wang, T. Lan, M. Zhang, W.Y. Zhang
    SINAP, Shanghai, People’s Republic of China
  • L. Feng, B. Liu
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
  • C.L. Li
    Shanghai Advanced Research Institute, Pudong, Shanghai, People’s Republic of China
 
  The design of Shanghai soft X-ray free electron laser (SXFEL) is based on laser driven photocathode, which can provide emittance <2.0 mm’mrad with 500 pC charge. The temporal shape of drive laser has significant influence on the electron beam emittance and brightness. This paper presents the transport line of drive laser system and the temporal shaping techniques for SXFEL. This drive laser produces 8 picosecond 266nm ultraviolet pulses with repetition rate 10Hz. A transverse deflecting cavity was used for indirectly characterizing the laser pulse temporal structure. Here we present the drive laser system with its temporal shaping method, and measurement results.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP058  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP059 Characterizing a Coherent Electron Source Extracted From a Cold Atom Trap emittance, cavity, controls, laser 469
 
  • H. Luo, P.X. Chu, J. Guo, T. Liu, Y.X. Xu, X. Zhao
    SWUST, Mianyang City, Sichuan Province, People’s Republic of China
  • X.H. Li, Q.H. Zhou
    Southwest University of Science and Technology, Mianyang, Sichuan, People’s Republic of China
  • K. Wang
    USTC, Hefei, Anhui, People’s Republic of China
 
  Funding: The National Natural Science Foundation of China under Grant No. 11875227.
In order to generate a fully coherent free electron laser (FEL) within a compact system, one approach is to interact a coherent electron bunch with a high power laser operating in the quantum FEL regime. The coherent electron source is obtained by ionizing the Rydberg atoms in a magneto-optical trap (MOT). The qualities of the electron source will have direct effects on the brightness, coherence, and line width of the free electron laser. A high quality ultra-cold electron source is obtained by carefully optimizing the extraction electrode structure, the acceleration and focusing system as well as the MOT. Through parameter optimization, a coherent electron source with a temperature lower than 10 K is obtained. Details of the optimization and the characteristics of the coherent electron source are reported in this paper.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP059  
About • paper received ※ 24 August 2019       paper accepted ※ 10 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP063 The Preliminary Study of a Pre-Bunched Terahertz Free Electron Laser by a Velocity Bunching Scheme radiation, bunching, undulator, FEL 477
 
  • R. Huang, Q.K. Jia, H.T. Li, Z. Zhao
    USTC/NSRL, Hefei, Anhui, People’s Republic of China
 
  Funding: Work supported by the National Natural Science Foundation of China Grant Number 11805200
Terahertz (THz) radiation has broad applications in biological sciences, materials imaging and radar communications and so on. High-power, frequency-adjustable THz radiation sources are desired. An electron beam, generated in a photoinjector and bunched at terahertz (THz) frequency, will excite a coherent THz radiation when entering an undulator. The radiation power mainly depends on the particle number and the bunching factor of the electron beam, which is limited by the space charge effect among the microbunches and the total rf phase width the macrobunch occupied. Previously we have designed a pre-bunched THz free electron laser (FEL) with the radiation frequency covering 0.5-5 THz. While the radiation intensity for the lower frequency (below 1~THz) is not very high because of the large energy spread and the low bunching factor. We will report a THz FEL by a velocity bunching scheme, which could realize more highly bunched beam especially in the low THz frequency region. The physical design of the electron source is described in detail.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP063  
About • paper received ※ 19 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP064 Performance of S-Band Photocathode RF Gun With Coaxial Coupler gun, laser, FEL, cathode 481
 
  • J.H. Hong, J.H. Han, C.-K. Min
    PAL, Pohang, Kyungbuk, Republic of Korea
 
  To improve the characteristics of electron beams, new S-band photocathode RF gun with a coaxial coupler has been developed and fabricated at the Pohang Accelerator Laboratory (PAL). This new RF gun is improved the field symmetry inside the cavity cell by applying the coaxial coupler, and the cooling performance by improving the cooling lines. The RF gun is installed in the injector test facility (ITF) for high power RF test. This paper reports the recent results on the RF conditioning process and the beam tests of the RF gun with high power RF at ITF. We present and discuss the measurement results of the basic beam parameters.  
poster icon Poster WEP064 [0.784 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP064  
About • paper received ※ 24 August 2019       paper accepted ※ 26 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP073 Experience With MCP-Based Photon Detector at FLASH2 radiation, FEL, undulator, detector 495
 
  • S. Grunewald, E. Muller, E. Schneidmiller, K.I. Tiedtke, M.V. Yurkov
    DESY, Hamburg, Germany
  • O.I. Brovko, A.Yu. Grebentsov, E. Syresin
    JINR, Dubna, Moscow Region, Russia
 
  In this report we describe MCP-based radiation detector at FLASH2. Micro-channel plate (MCP) detects scattered radiation from a target (mesh). Use of different targets and geometrical positioning of the MCP plates provides control of photon flux on the detector. MCP detector covers the whole wavelength range of FLASH2 (from 2.x nm to 100 nm). Dynamic range spans from sub-nJ to mJ level (from spontaneous to saturation level). Relative accuracy of single-shot radiation pulse energy measurements in the exponential gain regime is about 1%. DAQ based software is under development which allows to perform cross-correlation of the SASE FEL performance with electron beam jitters. As a result, it is possible: (i) to organize efficient feedback for cancellation of machine jitters, and (ii) to use statistical techniques for characterization of SASE FEL radiation deriving such important quantities as gain curve (gain of the radiation pulse energy and its fluctuations along the undulator), radiation pulse duration, coherence time, and degree of transverse coherence. Relevant experimental results are presented in the paper.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP073  
About • paper received ※ 19 August 2019       paper accepted ※ 26 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP079 Effect of Heat Load on Cryo-Cooled Monochromators at the European X-Ray Free-Electron Laser: Simulations and First Experimental Observations FEL, experiment, simulation, photon 502
 
  • I. Petrov, U. Boesenberg, M. Dommach, J. Eidam, J. Hallmann, K. Kazarian, C. Kim, W. Lu, A. Madsen, J. Möller, M. Reiser, L. Samoylova, R. Shayduk, H. Sinn, V. Sleziona, A. Zozulya
    EuXFEL, Schenefeld, Germany
  • J.W.J. Anton, S.P. Kearney, D. Shu
    ANL, Lemont, Illinois, USA
  • X. Dong
    SINAP, Shanghai, People’s Republic of China
  • X. Dong
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
 
  European XFEL (EuXFEL) generates high-intensity ultra-short pulses at MHz repetition rate. At hard X-ray instruments, cryo-cooled silicon monochromators are used to reduce pulse bandwidth. Here, first experimental observations during commissioning of a cryo-cooled monochromator at Materials Imaging and Dynamics (MID) instrument are presented and compared with heat flow simulations. A thermal relaxation time is estimated and compared with arrival time interval between pulses. This provides the repetition rate tolerable for stable operation of monochromator.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP079  
About • paper received ※ 19 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP080 ROSA: Reconstruction of Spectrogram Autocorrelation for Self-Amplified Spontaneous Emission Free-Electron Lasers radiation, FEL, laser, free-electron-laser 506
 
  • S. Serkez, G. Geloni, N. Gerasimova
    EuXFEL, Schenefeld, Germany
  • O. Gorobtsov
    Cornell University, Ithaca, New York, USA
  • B. Sobko
    LNU, Lviv, Ukraine
 
  X-ray Free Electron Lasers (FELs) have opened new avenues in photon science, providing coherent X-ray radiation pulses orders of magnitude brighter and shorter than previously possible. The emerging concept of "beam by design" in FEL accelerator physics aims for accurate manipulation of the electron beam to tailor spectral and temporal properties of radiation for specific experimental purposes, such as X-ray pump/X-ray probe and multiple wavelength experiments. A cost-efficient method to extract information on longitudinal Wigner distribution function of emitted FEL pulses is proposed. It requires only an ensemble of measured FEL spectra.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP080  
About • paper received ※ 20 August 2019       paper accepted ※ 26 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP085 Field Integral Measurements of DAVV Undulators and Future Measurement Plan undulator, controls, LabView, insertion 513
 
  • M. Gehlot, S.M. Khan, R. Khullar, G. Mishra
    Devi Ahilya University, Indore, India
  • J. Hussain
    Department of Applied Physics, UIT, Bhopal, India
  • F. Trillaud
    UNAM, México, D.F., Mexico
 
  Funding: This work is supported by SERB-DST grant EMR/2014/00120 and financial support from UGC [F.15-1/2014-15/PDFWM-2014-15-GE-MAD-26801(SA-II)], Delhi and DGAPA of UNAM, fund PAPIIT TA100617
The Insertion device development and Application (IddA) laboratory of Devi Ahilya University, Indore, India has ongoing activities on undulator design and development. In this paper, we analyze the field integral properties of the two DAVV undulator. The first is the IddA U20 prototype NdFeB-cobalt steel hybrid in house designed device of 20 mm period length with twenty five periods. The uniform gap variable hybrid undulator provides magnetic flux density (in rms) from 2400 G to 500 G in the 10 mm to 20 mm gap range. The second is the NdFeB based U50II undulator of 50 mm period length with 20 number of periods. Hall probe results are described. A short description of the measurement plan of the undulator on the pulsed wire bench and stretched wire bench is described.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP085  
About • paper received ※ 20 August 2019       paper accepted ※ 26 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP086 Capabilities of Terahertz Super-Radiance from Electron Bunches Moving in Micro-Undulators undulator, radiation, GUI, laser 517
 
  • N. Balal, V.L. Bratman, A. Friedman, Yu. Lurie
    Ariel University, Ariel, Israel
  • V.L. Bratman
    IAP/RAS, Nizhny Novgorod, Russia
 
  Funding: This work was supported by the Israeli Ministry of Science, Technology and Space and by the Russian Foundation for Basic Research, grant No. 16-02-00794.
An available frequency range of coherent radiation from ps bunches with high charge and moderate particle energy significantly enhances if one uses a micro-undulator with a high transverse field. Such an undulator can be implemented by redistributing a strong uniform magnetic field by a helical ferromagnetic or copper insertion. According to simulations and experiments with prototypes, a steel helix with a period of (8-10) mm and an inner diameter of (1.5-2) mm inserted in the 3T-field of solenoid can provide an undulator field with an amplitude of 0.6 T. Using a hybrid system with a permanently magnetized structure can increase this value up to 1.1 T. The necessary steel helices can be manufactured on the machine, assembled from steel wires, formed from powder, or 3D - printed. Simulations based on the WB3D code demonstrate that using such undulators with the length of (30-40) cm enable single-mode super-radiance from bunches with energy of 6 MeV, charge of 1 nC and duration of 2 ps moving in an over-sized waveguide in frequency range of 3-5 THz. The calculated efficiency of such process is (2-4)% that many times exceeds efficiency for short bunches of the same initial density.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP086  
About • paper received ※ 14 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP089 Pulse Energy Measurement at the SXFEL FEL, undulator, radiation, photon 521
 
  • Z.P. Liu, H.X. Deng, C. Feng, B. Liu, D. Wang, L.Y. Yu
    SINAP, Shanghai, People’s Republic of China
 
  The test facility is going to generate 8.8 nm FEL radiation using an 840 MeV electron linac passing through the two-stage cascaded HGHG-HGHG or EEHG-HGHG (high-gain harmonic generation, echo-enabled harmonic generation) scheme. Several methods have been developed to measure the power of pulse. The responsivity of silicon photodiode having no loss in the entrance window. Silicon photodiode reach saturates at the SXFEL. In this work, we simulated the attenuator transmittance for different thicknesses. We also show the preparations of the experiment results at the SXFEL .  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP089  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP092 Spare Undulator Production for PAL-XFEL HX1 Beamline undulator, FEL, operation, permanent-magnet 524
 
  • J.H. Han, Y.G. Jung, D.E. Kim, S.J. Lee
    PAL, Pohang, Kyungbuk, Republic of Korea
 
  In the PAL-XFEL hard X-ray beamline, 20 undulator segments with a 26 mm period and a 5 m length are installed and operated for XFEL user service. One spare undulator was manufactured in December 2018. The magnetic measurements and tuning was carried out recently. We report the measurement and tuning results.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP092  
About • paper received ※ 20 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP093 Radiation Damage Monitoring at PAL-XFEL undulator, radiation, FEL, monitoring 528
 
  • S.J. Lee, J.H. Han, Y.G. Jung, D.E. Kim, G. Mun
    PAL, Pohang, Kyungbuk, Republic of Korea
 
  Pohang Accelerator Laboratory X-ray Free Electron Laser (PAL-XFEL) has two undulator beamlines, one hard and one soft X-ray beamlines. These two undulator beamlines are in operation since 2017. To maintain the FEL radiation property, the B-field properties of PAL-XFEL undulators need to be kept at certain level. Under the 10 GeV beam operation condition, the accumulated radiation can affect the permanent magnet properties of the undulators. However, the radiation damage of permanent magnet can be different by the operation environment and the geometry of the undulator. Accumulated radiation sensors and a miniature undulator with a few periods are installed in the PAL-XFEL hard X-ray undulator line to monitor the undulator radiation damage. In this proceeding, the radiation monitoring activities and the recent measurement results will be introduced.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP093  
About • paper received ※ 19 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP094 Variable-Period Variable-Pole Number Hybrid Undulator Design for Novosibirsk THz FEL undulator, FEL, radiation, permanent-magnet 531
 
  • I.V. Davidyuk, O.A. Shevchenko, V.G. Tcheskidov, N.A. Vinokurov
    BINP SB RAS, Novosibirsk, Russia
 
  The undulator developed for the first FEL of Novosibirsk FEL facility employs variable-period structure based on the hybrid undulator scheme with poles splinted into halves. The design was adapted to deliver optimal performance, estimations were made based on results of three-dimensional field simulations. According to the modeling results, the undulator will not only widen significantly the first FEL tuning range moving the long-wavelength border of the first harmonic from 200 µm to 450 µm but also provide wider aperture and increase efficiency at shorter wavelengths.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP094  
About • paper received ※ 18 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP095 The Athos Soft X-Ray Beamlines at SwissFEL FEL, undulator, operation, photon 535
 
  • R. Follath, U. Flechsig, L. Patthey, U.H. Wagner
    PSI, Villigen PSI, Switzerland
 
  After the successful start of the hard X-ray FEL at SwissFEL in 2016, the soft X-ray FEL ATHOS at SwissFEL is expected to deliver the first beam by end of 2019. This contribution describes the beamlines attached to the FEL and reports on the status and plans for this soft X-ray facility. The ATHOS facility will operate three end stations. Two stations are already defined and are currently in the design and construction phase whereas the third station will be defined in the future. The first station (AMO) is dedicated to Atomic and Molecular physics as well as nonlinear spectroscopy. It is expected to get light in mid 2020. The second station (Furka) is for condensed matter physics. The beamline consists of a grating monochromator and distributes the beam downstream of the grating chamber by means of horizontal deflecting mirrors. Pink and monochromatic beam operation is foreseen at all branches. The monochromator uses variable line-spacing gratings on spherical substrates with a variable included angle and operates without an entrance slit. Its mechanics is based on the SX-700 design, but with the grating facing up and the mirror facing down. The installation of the beamline will start in August 2019.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP095  
About • paper received ※ 19 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP100 Conceptual Design of a Permanent Magnet Undulator for Fast Pulse-to-Pulse Polarization Switching in an FEL undulator, polarization, FEL, laser 545
 
  • T.Y. Chung, C.-S. Hwang
    NSRRC, Hsinchu, Taiwan
 
  In this paper, we propose the design of an undulator to alter polarization at a fast frequency and the energy spectrum pulse-to-pulse in free-electron lasers (FELs). A fast time varying magnetic field generated in an undulator can alter characteristic light features. An electromagnetic (EM) and permanent magnet (PM) type undulator provides typically a magnetic field switching frequency below 100 Hz. Inductance and heating issues from coils limit the performance for the EM type and favor small magnetic fields and longer periods and for the PM type, strong magnetic forces between magnet arrays create undesired relative motion. In this paper, we discuss these issues and propose an undulator made of Halbach cylinders with rotating magnet arrays to switch the magnetic fields. Concept, magnet structure and performance are discussed in this note.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP100  
About • paper received ※ 30 July 2019       paper accepted ※ 26 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP103 A Plasma Attenuator for Soft X-Rays in LCLS-II plasma, FEL, cavity, controls 553
 
  • A.S. Fisher, A.L. Benwell, Y. Feng, B.T. Jacobson
    SLAC, Menlo Park, California, USA
 
  Attenuation of X-ray FEL beams is often required to avoid damaging optics and detectors during alignment, and to study fluence-dependent effects. Soft X-rays are commonly attenuated by photoabsorption in a gas such as argon. However, absorbing a mJ pulse along a meter creates a pressure wave that drives gas away from the X-ray propagation axis, until equilibrium recovers in ~1 ms. This timescale matched the 120-Hz pulse spacing of LCLS, but at the high repetition rate (up to 1 MHz) and power (up to 200 W) of LCLS-II, the attenuation of subsequent pulses is reduced. Simulations demonstrate hysteresis and erratic attenuation from gas-density depletion. Instead, we propose to replace the gas column with an argon plasma in a TM010 RF cavity. The density profile then is largely set by the RF mode. X-ray absorption becomes a perturbation compared to the energy in the plasma. An LCLS-II solid-state RF amplifier, generating up to 4 kW at 1.3 GHz, can provide the drive, and the FPGA-based low-level RF controller can be programmed to track tuning with plasma density. Several diagnostics are planned to monitor plasma properties over a fill-pressure range of 10 to 1000 Pa.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP103  
About • paper received ※ 16 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEP107 Polarizing Afterburner for the LCLS-II Undulator Line undulator, radiation, polarization, FEL 560
 
  • H.-D. Nuhn
    SLAC, Menlo Park, California, USA
 
  Funding: This work was supported by U.S. Department of Energy, Office of Basic Energy Sciences, under Contract DE-AC02-76SF00515.
A fixed-gap polarizing undulator (Delta) has been successfully operated in afterburner mode in the LCLS FEL beamline at the SLAC National Accelerator Laboratory (SLAC) from August 2014 to the end of operations of the LCLS facility in December 2018. The LCLS undulator line is currently being replaced by two new undulator lines (as part of the LCLS-II project) to operate in the hard and soft X-ray wavelength ranges. Polarizing afterburners are planned for the end of the soft X-ray (SXR) line. A new polarizing undulator (Delta-II) is being developed for two reasons: (1) increased maximum K value to be resonant over the entire operational range of the SXR beamline (2) variable gap for K value control. It has been shown that using row phase control to reduce the K value while operating in circular polarizing mode severely degrades the performance of a polarizing undulator in afterburner mode. The device is currently scheduled for installation 2020-2021. The paper will explain the need for the variable gap design backed up by beam based measurements done with the LCLS Delta undulator.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP107  
About • paper received ※ 27 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WED01 Experience with Short-Period, Small Gap Undulators at the SwissFEL Aramis Beamline undulator, alignment, photon, FEL 564
 
  • T. Schmidt, M. Aiba, A.D. Alarcon, C. Arrell, S. Bettoni, M. Calvi, A. Cassar, E. Ferrari, R. Follath, R. Ganter, N. Hiller, P.N. Juranič, C. Kittel, F. Löhl, E. Prat, S. Reiche, T. Schietinger, D. Voulot, U.H. Wagner
    PSI, Villigen PSI, Switzerland
  • N.J. Sammut
    University of Malta, Faculty of Engineering, Msida, Malta
 
  The SwissFEL Aramis beamline provides hard X-ray FEL radiation down to 1 Angström with 5.8 GeV and short period, 15 mm, in-vacuum undulators (U15). To reach the maximum designed K-value of 1.8 the U15s have to be operated with vacuum gaps down to 3.0 mm. The thirteen-undulator modules are 4 m long and each of them is equipped with a pair of permanent magnet quadrupoles at the two ends, aligned magnetically to the undulator axis. Optical systems and dedicated photon diagnostics are used to check the alignment and improve the K-value calibration. In this talk the main steps of the undulator commissioning will be recalled and a systematic comparison between the magnetic results and the electron and photon based measurements will be reported to highlight achievements and open issues.  
slides icon Slides WED01 [13.825 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WED01  
About • paper received ※ 28 August 2019       paper accepted ※ 06 November 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THA04 Ultrafast Magnetisation Dynamics at the Low-Fluence Limit Supported by External Magnetic Fields laser, scattering, radiation, FEL 574
 
  • M. Riepp, K. Bagschik, T. Golz, G. Grübel, L. Müller, A. Philippi-Kobs, W.R. Roseker, R. Rysov, N. Stojanovic, M. Walther
    DESY, Hamburg, Germany
  • F. Capotondi, M. Kiskinova, D. Naumenko, E. Pedersoli
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • R. Frömter, H.P. Oepen
    University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
 
  We report on ultrafast magnetisation dynamics in ferro-magnetic cobalt/platinum multilayers upon pumping by near and mid to far infrared radiation, utilizing sub-100 femtosecond free-electron laser pulses. The evolution of the excited magnetic state is studied on femtosecond timescales with nanometre spatial resolution and element selectivity, employing time-resolved magnetic small-angle X-ray scattering. The obtained results contribute to the ongoing discussion to what extent either coupling of the electromagnetic field or rather quasi-instantaneous heating of the electron-system is the driving force for phenomena like ultrafast demagnetization or all-optical helicity-dependent switching.  
slides icon Slides THA04 [4.980 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THA04  
About • paper received ※ 19 August 2019       paper accepted ※ 19 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THB02 Understanding 1D to 3D Coherent Synchrotron Radiation Effects simulation, radiation, emittance, experiment 578
 
  • A.D. Brynes
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
 
  Collective effects such as coherent synchrotron radiation (CSR) can have a strong influence of the properties of an electron bunch with respect to the quality of the FEL light that it produces. In particular, CSR experienced by a bunch on a curved trajectory can increase the transverse emittance of a beam. In this contribution, we present an extension to the well-established 1D theory of CSR by accounting fully for the forces experienced in the entrance and exit transients of a bending magnet. A new module of the General Particle Tracer (GPT) tracking code was developed for this study, showing good agreement with theory. In addition to this analysis, we present experimental measurements of the emittance growth experienced in the FERMI bunch compressor chicane as a function of bunch length. When the bunch undergoes extreme compression, the 1D theory breaks down and is no longer valid. A comparison between the 1D theory, experimental measurements and a number of codes which simulate CSR differently are presented, showing better agreement when the transverse properties of the bunch are taken into account.  
slides icon Slides THB02 [3.591 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THB02  
About • paper received ※ 19 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THB04 Longitudinal Phase Space Study on Injector Beam of High Repetition Rate X-Ray FEL linac, cavity, bunching, laser 584
 
  • Q. Gu
    SSRF, Shanghai, People’s Republic of China
  • Z. Wang
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
 
  The longitudinal phase space of the high repetition rate injector beam usually twisted and deteriorated by the space charge force. It causes the correlated energy spread and the local chirp within the beam, which could not compensated by the harmonic correction. As a consequence of this problem, one could not get ideal beam with a peak current more than kiloamperes. In this paper several approaches have been studied to relieve this effect and get the well compressed beam for the lasing.  
slides icon Slides THB04 [3.151 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THB04  
About • paper received ※ 26 August 2019       paper accepted ※ 16 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP002 Beam Based Alignment in all Undulator Beamlines at European XFEL FEL, undulator, alignment, quadrupole 592
 
  • M. Scholz, W. Decking
    DESY, Hamburg, Germany
  • Y. Li
    EuXFEL, Hamburg, Germany
 
  The Free Electron Laser European XFEL aims at delivering X-rays from 0.25 keV up to 25 keV out of three SASE undulators. A good overlap of photon and electron beams is indispensable to obtain good lasing performance, especially for the higher photon energies. Thus the quadrupole magnets in the undulators must be aligned as good as possible on a straight line. This can only be realized with a beam based alignment procedure. In this paper we will report on the method that was performed at the European XFEL. We will also discuss our results.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP002  
About • paper received ※ 20 August 2019       paper accepted ※ 12 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP003 Arbitrary Order Perturbation Theory for a Time-Discrete Model of Micro-Bunching Driven by Longitudinal Space Charge bunching, space-charge, FEL, simulation 596
 
  • Ph. Amstutz
    LBNL, Berkeley, California, USA
  • M. Vogt
    DESY, Hamburg, Germany
 
  A well established model for studying the micro-bunching instability driven by longitudinal space charge in ultra-relativistic bunches in FEL-like beamlines can be identified as a time-discrete Vlasov system with general drift maps and Poisson type collective kick maps. Here we present an arbitrary order perturbative approach for the general system and the complete all-orders solution for a special example. For this example we benchmark our theory against our Perron-Frobenius tree-code.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP003  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP007 Frequency-Detuning Dependent Transient Coaxial RF Coupler Kick gun, cavity, focusing, simulation 599
 
  • Y. Chen, J.D. Good, M. Groß, P.W. Huang, I.I. Isaev, C. Koschitzki, M. Krasilnikov, S. Lal, X. Li, O. Lishilin, G. Loisch, D. Melkumyan, R. Niemczyk, A. Oppelt, H.J. Qian, H. Shaker, G. Shu, F. Stephan, G. Vashchenko
    DESY Zeuthen, Zeuthen, Germany
  • F. Brinker, W. Decking
    DESY, Hamburg, Germany
 
  We model and characterize a transverse kick which results from the coaxial RF coupler in the L-band RF gun at the Photo Injector Test Facility at DESY in Zeuthen (PITZ). The RF pulse is typically 600 µs long and used to produce a train of up to 2700 electron bunches. The kick is transient and found to be dependent on the detuning of the resonance frequency of the gun cavity. The frequency detuning within the RF macro-pulse results in a variation in the kick strength along the pulse. This leads to a downstream orbit and size change of individual bunches within the train. Using 3D RF field distributions calculated at detuned frequencies of the cavity, particle tracking simulations are performed to simulate the transient kick onto the bunch train. Given a drift distance, the orbit and size change along a train of fixed length is estimated. Systematic measurements of the kick have meanwhile been carried out. The temperature of the cooling water for the gun is tuned allowing detailed characterization of the frequency detuning within the RF pulse, and thereby measurements of the kick under conditions of practical interest. Experimental findings and simulation results will be presented.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP007  
About • paper received ※ 13 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP008 Design of a Multi-Cell SRF Reduced-Beta Cavity for the Acceleration of Low Energy Electron Beams cavity, linac, SRF, operation 603
 
  • D.B. Bazyl, H. De Gersem, W.F.O. Müller
    TEMF, TU Darmstadt, Darmstadt, Germany
  • J. Enders, S. Weih
    TU Darmstadt, Darmstadt, Germany
 
  Funding: Work supported by DFG (GRK 2128)
Recently, the S-DALINAC has successfully passed the first ERL tests. One of the critical requirements for further operation in the ERL regime is minimising the longitudinal energy spread of the electron beam. One of the major sources for the current energy spread at the S-DALINAC is the low energy accelerating section. In order to overcome this problem an SRF reduced-beta cavity has been designed. The new cavity will replace the existing capture section and will allow to accelerate low energy electron beams with a minimised energy spread growth. In this work we discuss the electromagnetic and mechanical design of the SRF 3 GHz 6-cell reduced-beta cavity of elliptic type. In addition, we present the results of beam dynamics simulations.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP008  
About • paper received ※ 19 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP010 Simple and Robust Free Electron Laser Doubler FEL, laser, septum, undulator 609
 
  • S. Di Mitri, G. De Ninno, R. Fabris, S. Spampinati
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • G. De Ninno
    University of Nova Gorica, Nova Gorica, Slovenia
  • N. Thompson
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
  • N. Thompson
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
 
  Funding: This work has received funding by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 777431.
We present the design of a Free-Electron Laser (FEL) doubler suitable for the simultaneous operation of two FEL lines. The doubler relies on the physical selection of two longitudinal portions of an electron bunch at low energy, and on their spatial separation at high energy. Since the two electron beamlets are naturally synchronized, FEL pump-FEL probe experiments are enabled when the two photon pulses are sent to the same experimental station. The proposed solution offers improved flexibility of operation w.r.t. existing two-pulse, two-color FEL schemes, and allows for independent control of the color, timing, intensity and angle of incidence of the radiation pulses at the user end station. Detailed numerical simulations demonstrate its feasibility at the FERMI FEL facility.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP010  
About • paper received ※ 29 July 2019       paper accepted ※ 12 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP011 Experimental Benchmarking of Wakefields at the FERMI FEL Linac and Undulator Line wakefield, linac, undulator, FEL 613
 
  • S. Di Mitri, L. Sturari
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • C. Venier, R. Vescovo
    University of Trieste, Trieste, Italy
 
  Collective effects such as wakefields affect the dynamics of high brightness electron beams in linear accelerators (linacs), and can degrade the performance of short wavelength free-electron lasers (FELs). If a reliable model of wakefields is made available, the accelerator can be designed and configured with parameters that minimize their disrupting effect. In this work, the simulated effect of geometric (diffractive) wakefields and of coherent synchrotron radiation on the electron beam energy distribution at the FERMI FEL is benchmarked with measurements, so quantifying the accuracy of the model. Wakefields modelling is then extended to the undulator line, where particle tracking confirms the limited impact of the resistive wall wakefield on the lasing process. The study reveals an overall good understanding of collective effects in the facility [1].
[1] S. Di Mitri et al., Phys. Rev. Accel. and Beams, 22, 014401 (2019)
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP011  
About • paper received ※ 29 July 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP012 Compact FEL-Driven Inverse Compton Scattering Gamma-Ray Source photon, FEL, undulator, radiation 617
 
  • M. Placidi, G. Penn
    LBNL, Berkeley, California, USA
  • S. Di Mitri
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • C. Pellegrini
    UCLA, Los Angeles, California, USA
  • C. Pellegrini
    SLAC, Menlo Park, California, USA
 
  We explore the feasibility of a compact source of quasi-monochromatic, multi-MeV gamma-rays based on Inverse Compton Scattering (ICS) from a high intensity ultra-violet (UV) beam generated in a free-electron laser by the electron beam itself.[1] This scheme introduces a stronger relationship between the energy of the scattered photons and that of the electron beam, resulting in a device much more compact than a classic ICS for a given scattered energy. The same electron beam is used to produce gamma-rays in the 10-20 MeV range and UV radiation in the 10-15 eV range, in a ~4x22 m2 footprint system.
[1] M. Placidi et al., NIM A 855 (2017) 55-60.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP012  
About • paper received ※ 19 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP013 User Operation of Sub-Picosecond THz Coherent Transition Radiation Parasitic to a VUV FEL linac, target, radiation, FEL 621
 
  • S. Di Mitri, N. Adhlakha, E. Allaria, L. Badano, G. De Ninno, P. Di Pietro, G. Gaio, L. Giannessi, G. Penco, A. Perucchi, P. Rebernik Ribič, E. Roussel, S. Spampinati, C. Spezzani, M. Trovò, M. Veronese
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • G. De Ninno
    University of Nova Gorica, Nova Gorica, Slovenia
  • L. Giannessi
    ENEA C.R. Frascati, Frascati (Roma), Italy
  • S. Lupi
    Coherentia, Naples, Italy
  • S. Lupi
    Sapienza University of Rome, Roma, Italy
  • F. Piccirilli
    IOM-CNR, Trieste, Italy
  • E. Roussel
    PhLAM/CERLA, Villeneuve d’Ascq, France
  • E. Roussel
    PhLAM/CERCLA, Villeneuve d’Ascq Cedex, France
 
  Coherent transition radiation is enhanced in intensity and extended in frequency spectral range by the electron beam manipulation in the beam dump beam line of the FERMI FEL, by exploiting the interplay of coherent synchrotron radiation instability and electron beam optics [1]. Experimental observations at the TeraFERMI beamline [2] confirm intensity peaks at around 1 THz and extending up to 8.5 THz, for up to 80 µJ pulse energy integrated over the full bandwidth. By virtue of its implementation in an FEL beam dump line, this work might stimulate the development of user-oriented multi-THz beamlines parasitic and self-synchronized to VUV and X-ray FELs.
[1] S. Di Mitri et al., Scientific Reports, 8, 11661 (2018).
[2] A. Perucchi et al., Synch. Rad. News 4, 30 (2017).
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP013  
About • paper received ※ 29 July 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP015 The X-Band Linear Compression System in Dalian Coherent Light Source FEL, simulation, RF-structure, linac 625
 
  • Y. Yu, Z. Chen, G.K. Cheng, D.X. Dai, H.L. Ding, Z.G. He, L. Huang, Q.M. Li, Z.B. Li, L. Shi, J.T. Sun, K. Tao, Y.H. Tian, G.L. Wang, Z.Q. Wang, G.R. Wu, J.Y. Yang, X.M. Yang, W.Q. Zhang
    DICP, Dalian, People’s Republic of China
 
  Dalian Coherent Light Source (DCLS) is a free-electron laser (FEL) user facility working in the extreme ultraviolet (EUV) wavelength region from 50 to 150 nm. It mainly operates on the High Gain Harmonic Generation (HGHG) mode with the seed laser, although it can also run in the Self Amplified Spontaneous Emission (SASE) mode. The brightness and bandwidth of FEL radiation strongly depends on electron bunch quality, such as normalized transverse emittance, electron bunch energy, energy spread, peak current, etc. The high peak current with uniform longitudinal distribution is especially helpful for high peak power and narrow bandwidth of FEL, although it is not easy to achieve, due to the nonlinearity of sinusoidal accelerating radio frequency (RF) field and the 2nd-order momentum compaction coefficient T566 of bunch compressor. An X-band linearizer will be installed before the bunch compressor in order to correct this nonlinearity properly. In this paper, the beam dynamics design of the X-band linear compression system in DCLS is focused, and the simulation results with Elegant are presented and discussed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP015  
About • paper received ※ 19 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP016 Study of Microbunching Instability in SHINE Linac laser, bunching, linac, simulation 629
 
  • D. Huang
    SINAP, Shanghai, People’s Republic of China
  • D. Gu
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
  • M. Zhang
    Shanghai Advanced Research Institute, Pudong, Shanghai, People’s Republic of China
 
  The SHINE project in China aims at the next generation high repetation rate and high power hard X-ray free electron laser facility. The high quality electron beam is thus requested in the linac to generate such a high quality FEL lasing. As the prerequisite, the microbuncing instability introduced by the nonlinear effects such as the LSC, CSR and wakefields in the bunch compressing process must be taken care of, otherwise the electron beam will not meet the requirements of lasing. In this article, the microbunching effects including the gain of the instability in the linac of SHINE are estimated, and several ways for the control of the instability are proposed.  
poster icon Poster THP016 [0.536 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP016  
About • paper received ※ 24 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP018 Transverse Deflecting Structure Dynamics for Time-Resolved Machine Studies of Shine FEL, cavity, free-electron-laser, laser 632
 
  • J.W. Yan, H.X. Deng, B. Liu, D. Wang
    SINAP, Shanghai, People’s Republic of China
  • H.X. Deng, B. Liu, D. Wang
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
 
  Funding: National Natural Science Foundation of China (11775293), the National Key Research and Development Program of China (2016YFA0401900) and Ten Thousand Talent Program.
The transverse deflecting structure (TDS) has been widely used in modern free electron laser facilities for the longitudinal phase space diagnostics of electron beams. As the first hard x-ray free electron laser in China, the SHINE is designed to deliver photons with a repetition rate up to 1 MHz. In this paper, we present the beam dynamics study of the X-band TDS behind the undulator of SHINE. In order to prevent the screen from being damaged by electron bunches with a high repetition rate, the phase of the transverse deflecting cavity is designed to deviate from zero, and only those electron bunches that are kicked by the transverse deflecting cavity are sent to the screen. In addition, the evolutionary algorithm is introduced to optimize the lattice of the TDS line to reach the highest possible resolution.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP018  
About • paper received ※ 19 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP022 A General Optimization Method for High Harmonic Generation Beamline laser, free-electron-laser, radiation, coupling 638
 
  • Y. Zhang, X.J. Deng, W.-H. Huang, Z. Pan, C.-X. Tang
    TUB, Beijing, People’s Republic of China
 
  Shorter bunches produce a more coherent radiation and contain higher harmonic components. Here, based on transverse and longitudinal phase space coupling, a general method for analyzing the production of very short beam and searching for compression beamline is presented. With this method, several beamlines are found and optimized. The electron beam can be compressed to tens of nanometers, generating coherent high harmonic radiation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP022  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP024 Spontaneous Coherent Radiation of Stabilized Dense Electron Bunches radiation, undulator, cyclotron, GUI 643
 
  • Yu.S. Oparina, V.L. Bratman, A.V. Savilov
    IAP/RAS, Nizhny Novgorod, Russia
  • N. Balal, Yu. Lurie
    Ariel University, Ariel, Israel
 
  Funding: The work is supported by Russian Foundation for Basic Research Project 18-32-00351, 18-02-00765
Modern sources of dense electron beams allow the formation of compact sources of dense electron bunches with energies of 3-6 MeV, ps pulse durations, and charges of up to 1 nC. Such bunches can be used for the realization of relatively simple and compact powerful terahertz sources based on spontaneous coherent radiation. The power and duration of the process of such type of emission are limited due to an increase in the bunch length under the Coulomb repulsion. This complicates the effective implementation of the regime of spontaneous coherent radiation for dense bunches. Therefore, special methods for stabilization of the length of the operating e-bunch during its motion over a long electron-wave interaction region should be used. We propose several methods of the stabilization based on the axial bunch compression by self-radiated wave fields [1] and by quasi-static Coulomb fields inside a bunch [2]. The latter takes place in the case of the motion of electrons through the undulator in the "negative-mass" regime, when the Coulomb field inside the bunch leads not to repulsion of electrons but to their mutual attraction.
[1] I. V. Bandurkin, Yu. S. Oparina and A. V. Savilov, Appl. Phys. Lett. vol 110, p. 263508, 2017
[2] N. Balal, I. V. Bandurkin, V. L. Bratman, E. Magory, and A. V. Savilov, Appl. Phys. Lett. vol. 107, p. 163505, 2015
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP024  
About • paper received ※ 19 August 2019       paper accepted ※ 12 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP027 Simulation and Optimization of the Transport Beamline for the NovoFEL RF Gun gun, simulation, solenoid, emittance 647
 
  • A.S. Matveev, I.V. Davidyuk, O.A. Shevchenko, V.G. Tcheskidov, N.A. Vinokurov, V. Volkov
    BINP SB RAS, Novosibirsk, Russia
  • I.V. Davidyuk, A.S. Matveev, N.A. Vinokurov
    NSU, Novosibirsk, Russia
 
  A new low-frequency CW RF gun was developed and tested at Budker Institute of Nuclear Physics recently. We plan to use it to upgrade the ERL of the Novosibirsk FEL facility. It will allow increasing the average beam current (due to higher beam repetition rate) and thus increasing the average radiation power. The transport beamline for the RF gun uses the ninety-degree achromatic bend. It is designed in a way that keeps an option to operate with the old electrostatic gun as well. Due to the low beam energy (290 keV) the beam dynamics is strongly influenced by space-charge forces. The paper describes results of simulation and optimization of the RF gun transport beamline. Space-charge forces were taken into account with the code ASTRA. Main sources of emittance degradation were considered in order to decrease their influence during the optimization. In addition, the RF gun output beam parameters were measured for various RF gun emission phases. These experiments were simulated and the results were compared. The resulting beam parameters meets requirements of the Novosibirsk FEL facility ERL.  
poster icon Poster THP027 [3.158 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP027  
About • paper received ※ 16 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP031 Simulation and Optimization of Injector System for the Pre-bunched THz FEL linac, gun, radiation, simulation 654
 
  • N. Chaisueb, S. Rimjaem
    Chiang Mai University, Chiang Mai, Thailand
  • S. Rimjaem
    ThEP Center, Commission on Higher Education, Bangkok, Thailand
 
  A linac-based light source for generation of infrared free-electron laser is under the development at Chiang Mai University, Thailand. The injector system of the facility consists mainly of an S-band thermionic cathode RF electron gun, a pre-bunch compressor in a form of an alpha magnet and a travelling-wave linac structure. Two 180-degree magnetic bunch compressors are installed downstream the injector system. Two separate radiation beamlines for mid-infrared (MIR) and terahertz (THz) free-electron laser (FEL) are located following the bunch compressor systems. In this contribution, we focus only on the coherent and high-power pre-bunch THz FEL that is generated from electron bunches with a femtosecond length. Electron beam dynamic simulations with program ASTRA were performed to obtain optimal electron beam properties. Optimization of the injector system for the THz FEL is thus presented. The simulated results show that the beam at the linac exit has a bunch length of 282 fs with a charge of 200 pC when the linac RF phase is 90° and the alpha gradient is 300 G/cm. This optimal condition will be used as an input for simulation in the 180-degree bunch compressor system and in the THz undulator magnet.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP031  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP033 XFEL Isochronous Chicanes: Feasibility Study quadrupole, dipole, FEL, undulator 658
 
  • N. Thompson
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
 
  FEL schemes such as High-Brightness SASE [1] and Mode-Locking [2] require electron beam delays inserted between undulator sections. These schemes have been shown in simulations to perform most effectively when the electron beam delays are very close to isochronous, i.e. the first order longitudinal dispersion is very small. To minimise the disruption to the FEL process in the inter-undulator gaps, these delays must also be as compact as possible. In this paper we study the maximum longitudinal space that a delay chicane could occupy in an XFEL operating at 6 GeV before the peak power drops below a defined threshold, and we present a limit for the maximum longitudinal dispersion of the delay chicanes. We then present the optical designs of two chicanes that satisfy the requirements of length and isochronicity and show how these designs could be realised practically using small-aperture high-field quadrupoles.
[1] PRL 110, 134802 (2013).
[2] PRL 100, 203901 (2008).
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP033  
About • paper received ※ 16 August 2019       paper accepted ※ 09 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP035 Beam Shaping for High-Repetition-Rate X-Ray FELs octupole, emittance, FEL, linac 661
 
  • Y. Ding, K.L.F. Bane, Y.M. Nosochkov
    SLAC, Menlo Park, California, USA
 
  Beam shaping at normal-conducting, accelerator-based FELs, such as LCLS, plays an important role for improving lasing performance and for supporting special operating modes, such as the self-seeding scheme. Beam shaping methods include horn-collimation and dechirper manipulation. Applying the beam shaping concept to high-repetition-rate FELs driven by a superconducting linac, such as LCLS-II, beam invasive methods are not preferred due to concerns about high power deposition. We have recently studied a few shaping options for LCLS-II, such as manipulating the beam chirp before compression using corrugated devices, and modifying higher order optics terms in a chicane using octupoles. In this report we will discuss the results.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP035  
About • paper received ※ 23 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP037 A Novel One-Dimensional Model for CSR Wakefields wakefield, radiation, synchrotron, synchrotron-radiation 669
 
  • G. Stupakov
    SLAC, Menlo Park, California, USA
 
  The existing 1D models of the coherent synchrotron radiation (CSR) wakefield in free space assume that the longitudinal bunch distribution remains constant when the beam propagates through a magnetic lattice. In this paper, we derive a formula for a 1D CSR wake that takes into account variation of the bunch length along the orbit. The formula is valid for arbitrary curvilinear beam trajectory. We analyze the validity of the 1D model in a typical implementation of an FEL bunch compressor.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP037  
About • paper received ※ 12 August 2019       paper accepted ※ 26 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP041 Interaction of Powerful Electro-Magnetic Fields With Bragg Reflectors laser, simulation, FEL, experiment 673
 
  • I. Bahns, W. Hillert, P. Rauer, J. Roßbach
    University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
  • H. Sinn
    EuXFEL, Schenefeld, Germany
 
  Funding: supported by BMBF FKZ 05K16GU4
The interaction of an X-ray free electron laser (XFEL) with a Bragg Reflector can cause a change of the lattice constant, which has a direct influence on the stability of the reflection conditions [1] and can also excite modes of vibration [2]. The dynamical thermoelastic effects of the photon-matter-interaction are simulated with a finite-element-method (FEM) using the assumptions of continuums mechanics. To compare the simulation results with measured signals, a Michelson interferometer with ultrafast photodiodes (risetime <175ps, bandwith >2GHz) has been built up. To test the experimental setup in an in-house environment a pulsed UV laser is used to introduce a temporal displacement field in a silicon crystal created by about 0.26µJ of absorbed energy. The measured signal is in agreement with the FEM simulation and has shown that if averaging over thousands of pulses is applied a resolution <0.5pm is feasible. This makes this experimental setup useful to investigate the X-ray-matter-interaction of Bragg reflectors at modern X-ray facilities.
[1] S. Stoupin et al., Physical Review B 86.5 (2012): 054301.
[2] B. Yang, S. Wang and J. Wu, J. Synchrotron Rad. (2018) 25, 166-176.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP041  
About • paper received ※ 23 August 2019       paper accepted ※ 31 October 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP044 The Simulation Study for Single and Multi Turn ERL Based EUV FEL simulation, FEL, linac, laser 677
 
  • K.M. Nam, G.S. Yun
    POSTECH, Pohang, Kyungbuk, Republic of Korea
  • Y.W. Parc
    PAL, Pohang, Kyungbuk, Republic of Korea
 
  Photolithography technology is the core part of the semiconductor manufacturing process. It has required light having stronger power for higher throughput. ERL based EUV FEL is emerging as a next generation EUV source which can produce the light over 10 kW. In this study, first, EUV-FEL design, which is based on single turn, is represented. It accelerates 40 pC electron beam to 600 MeV and produces EUV, whose wavelength and power are 13.5 nm and 37 kW. Second, multiturn based design is represented. It improved compactness to make it more suitable for industrial use. As a result, the electron beam was able to obtain the kinetic energy and circulate, and the size was reduced to about half without reducing the power greatly. This study is expected to increase the practical industrialization potential of ERL-based photolithography.  
poster icon Poster THP044 [0.584 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP044  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP047 Laser-Driven Compact Free Electron Laser Development at ELI-Beamlines laser, FEL, undulator, photon 680
 
  • A.Y. Molodozhentsev
    Czech Republic Academy of Sciences, Institute of Physics, Prague, Czech Republic
  • J.T. Green, J. Hawke, M. Kaur, D. Kocon, G. Korn, K.O. Kruchinin
    ELI-BEAMS, Prague, Czech Republic
  • A.R. Maier
    University of Hamburg, Hamburg, Germany
 
  Funding: Advanced research using high-intensity laser produced photons and particles (CZ.02.1.01/0.0/0.0/16019/0000789) from the European Regional Development Fund.
The ELI-Beamlines Centre, located near Prague (Czech Republic) is an international user facility for fundamental and applied research. Using the optical parametric chirped-pulse amplification (OPCPA) technique, the ELI-Beamlines laser system will provide the laser pulse energy up to 10 Joules with the repetition rate up to 25 Hz. Combination of new laser development with constant improvement of the LWFA electron beam parameters has great potential in future development of the compact high repetition rate Free Electron Laser. The LWFA-driven FEL project, called "LUIS", is currently under preparation at ELI-Beamlines in collaboration with the University of Hamburg. The goal of the project is the improvement of the electron beam parameters in order to demonstrate the amplification and saturation of the SASE-FEL photon power in a single unit of the FEL undulator. A successful realization of the LUIS project will open a way to a next generation of laser-driven X-FELs. An overview of the LUIS project including design features and a description of all instrumentations used to characterize the laser, plasma, electron beam, photon generation will be presented in frame of this report.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP047  
About • paper received ※ 15 August 2019       paper accepted ※ 16 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP048 Progress Towards Laser Plasma Electron Based Free Electron Laser on COXINEL laser, plasma, undulator, FEL 684
 
  • M.-E. Couprie, T. André, F. Blache, F. Bouvet, F. Briquez, Y. Dietrich, J.P. Duval, M. El Ajjouri, A. Ghaith, C. Herbeaux, N. Hubert, M. Khojoyan, C.A. Kitégi, M. Labat, N. Leclercq, A. Lestrade, A. Loulergue, O. Marcouillé, F. Marteau, D. Oumbarek Espinos, P. Rommeluère, M. Sebdaoui, K.T. Tavakoli, M. Valléau
    SOLEIL, Gif-sur-Yvette, France
  • I.A. Andriyash, V. Malka, S. Smartzev
    Weizmann Institute of Science, Physics, Rehovot, Israel
  • C. Benabderrahmane
    ESRF, Grenoble, France
  • S. Bielawski, C. Evain, E. Roussel, C. Szwaj
    PhLAM/CERLA, Villeneuve d’Ascq, France
  • S. Corde, J. Gautier, J.-P. Goddet, O.S. Kononenko, G. Lambert, K. Ta Phuoc, A. Tafzi, C. Thaury
    LOA, Palaiseau, France
 
  Laser plasma acceleration (LPA) with up to several GeV beam in very short distance appears very promising. The Free Electron Laser (FEL), though very challenging, can be viewed as a qualifying application of these new emerging LPAs. The energy spread and divergence, larger than from conventional accelerators used for FEL, have to be manipulated to fulfil the FEL requirements. On the test experiment COXINEL (ERC340015), the beam is controlled in a manipulation [1,2] line, using permanent magnet quadrupoles of variable strength [3] for emittance handing and a decompression chicane equipped with a slit for the energy selection, enabling FEL amplification for baseline reference parameters [2]. The electron position and dispersion are independently adjusted [4]. The measured spontaneous emission radiated by a 2 m long 18 mm period cryo-ready undulator exhibits the typical undulator spatio-spectral pattern, in agreement with the modelling of the electron beam travelling along the line and of the afferent photon generation. The wavelength is easily tuned with undulator gap variation. A wavelength stability of 2.6% is achieved. The undulator linewidth can be controlled.
[1] A. Loulergue et al., New J. Phys. 17 023028 (2015)
[2] M. E. Couprie et al., PPCF 58, 3 (2016)
[3] F. Marteau et al., APL 111, 253503 (2017)
[4] T. André et al., Nature Comm. 1334 (2018)
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP048  
About • paper received ※ 13 August 2019       paper accepted ※ 16 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP049 A Versatile THz Source for High-Repetition Rate XFELs FEL, GUI, radiation, undulator 688
 
  • F. Lemery, M. Dohlus, K. Flöttmann, M. Marx
    DESY, Hamburg, Germany
  • M. Ivanyan, V.M. Tsakanov
    CANDLE, Yerevan, Armenia
 
  Funding: FL was partially funded by the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No. 730871
The development of high-repetition rate XFELs brings an exciting time for novel fundamental science exploration via pump-probe interactions. Laser-based pump sources can provide a wide range of wavelengths (200-10000~nm) via various gain media. These sources can also be extended with optical parametric amplifiers to cover a largely versatile spectral and bandwidth range. However beyond 10~μm, toward the THz regime, there exists no suitable gain media, and optical-to-THz efficiencies are limited below 1\%. In this paper we discuss the use of Cherenkov-based radiators with conventional electron bunches to generate high-power THz radiation over a wide range of parameters for existing and future XFEL facilities.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP049  
About • paper received ※ 25 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP051 Generating Trains of Attosecond Pulses with a Free-Electron Laser FEL, laser, radiation, free-electron-laser 692
 
  • S. Serkez, G. Geloni
    EuXFEL, Schenefeld, Germany
  • M.H. Cho, H.-S. Kang, G. Kim, J.H. Ko, C.-K. Min, I.H. Nam, C.H. Shim
    PAL, Pohang, Republic of Korea
  • F.-J. Decker
    SLAC, Menlo Park, California, USA
  • J.H. Ko, C.H. Shim
    POSTECH, Pohang, Kyungbuk, Republic of Korea
  • Yu. Shvyd’ko
    ANL, Lemont, Illinois, USA
 
  Recently, a Hard X-ray Self-Seeding setup was commissioned at PAL XFEL. Its main purpose is to increase the temporal coherence of FEL radiation in an active way. We report another application of this setup to generate trains of short sub-femtosecond pulses with linked phases. We discuss preliminary results of both experiment and corresponding simulations as well as indirect diagnostics of the radiation properties.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP051  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP055 A Storage Ring Design for Steady-State Microbunching to Generate Coherent EUV Light Source lattice, storage-ring, simulation, radiation 700
 
  • Z. Pan, X.J. Deng, W.-H. Huang, T. Rui, C.-X. Tang, Y. Zhang
    TUB, Beijing, People’s Republic of China
  • A. Chao
    SLAC, Menlo Park, California, USA
  • W. Wan
    ShanghaiTech University, Shanghai, People’s Republic of China
 
  The proposal of Steady State Microbunching (SSMB) makes it available to generate high average power coherent radiation, especially has the potential to generate kW level of EUV source for lithography. In order to achieve and maintain SSMB, we propose several concepts. One is that a very short electron bunch below 100 nm is stored in the ring, inserting a strong focusing part to compress the bunch to ~3 nm, then radiating coherently, which is called longitudinal strong focusing (LSF) scheme. We have optimized the candidate lattice to achieve the very short electron bunch storage and microbunching for electron beam. The tracking results show the equilibrium length of the electron bunch is about 400 nm and no particles lose after 4.3 damping time while only single-particle effect is considered. More optimization and some new design based on the simulation results are still implementing.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP055  
About • paper received ※ 19 August 2019       paper accepted ※ 26 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP060 Development of RF-Undulators and Powering Sources for Compact Efficient Compton FEL-Scattrons undulator, radiation, simulation, FEL 704
 
  • A.V. Savilov, E.D. Abubakirov, N.S. Ginzburg, S.V. Kuzikov, N.Yu. Peskov, A.A. Vikharev, V.Yu. Zaslavsky
    IAP/RAS, Nizhny Novgorod, Russia
 
  Conception of Compton-type FELs operating up to X-ray band is under development currently at IAP RAS (N.Novgorod). This concept is aimed at reducing energy of a driving relativistic electron beam and thereby increasing efficiency of the electron-wave interaction in FEL, as well as achieving relative compactness of the generator. The basis of this concept is RF-undulators of a new type - the so-called ’flying’ undulators. Results of current research of these RF-undulators, their simulations and ’cold’ tests in the Ka-band are presented. For powering RF-undulators spatially-extended narrow-band Cerenkov masers are developed in the specified frequency range. In order to achieve the required sub-gigawatt power level of the pumping wave in a strongly oversized oscillator, we exploit the original idea of using two-dimensional distributed feedback implemented in the 2D doubly-periodical slow-wave structures. The design parameters of Ka-band surface-wave oscillator intended for powering RF-undulators, results of its simulation and initial experimental studies are discussed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP060  
About • paper received ※ 15 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP065 Multi-Objective FEL Design Optimisation Using Genetic Algorithms FEL, simulation, brightness, framework 711
 
  • D.J. Dunning, H.M. Castañeda Cortés, J.K. Jones, N. Thompson
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
  • J.K. Jones, N. Thompson
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
 
  Simulation studies were carried out to optimise the performance of various FEL designs, with examples including longitudinal current profile shaping for a seeded FEL, and selection of the chicane delays for the High-Brightness SASE technique. In these examples multi-objective genetic algorithms were applied to a single section of the overall facility simulation, i.e. the undulator, as is the common approach. Further studies are also reported in which a full start-to-end simulation chain was optimised, with the aim of delivering a more holistic facility design optimisation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP065  
About • paper received ※ 20 August 2019       paper accepted ※ 25 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP066 XARA: X-Band Accelerator for Research and Applications FEL, undulator, linac, photon 715
 
  • D.J. Dunning, L.S. Cowie, J.K. Jones
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
  • L.S. Cowie, J.K. Jones
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
  • L.S. Cowie
    Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
 
  XARA (X-band Accelerator for Research and Applications) is a proposal for a compact ~1 GeV/c accelerator to produce attosecond light pulses in the EUV to soft X-ray region. It is under consideration as a potential future upgrade to the CLARA facility at Daresbury Laboratory, utilising high-performance X-band RF technology to increase the electron beam momentum from 250 MeV/c. Emerging techniques for generating single-cycle undulator light [1] would give access to attosecond timescales, enabling studies of ultra-fast dynamics, while also being very compact. XARA would also enhance the existing capabilities for accelerator science R&D by incorporating X-band development and increasing the electron beam momentum for novel acceleration studies.
[1] Alan Mak et al., Rep. Prog. Phys. 82 025901 (2019)
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP066  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP068 LCLS-II Extruded Aluminum Undulator Vacuum Chambers — New Approaches to an Improved Aperture Surface Finish undulator, vacuum, alignment, FEL 719
 
  • G.E. Wiemerslage, P.K. Den Hartog, J. Qian, M. White
    ANL, Lemont, Illinois, USA
 
  Funding: Work at Argonne National Laboratory is supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under contract # DE-AC02-06CH11357.
The Linac Coherent Light Source, (LCLS) the world’s first x-ray free electron laser (FEL) became operational in 2009. The Advanced Photon Source contributed to the original project by designing and building the undulator line. Two slightly different variations of these chambers were required for LCLS-II: one for a soft X-ray (SXR) undulator line, and one for a hard X-ray (HXR) undulator line. Because of the extremely short electron bunch length, a key physics requirement was to achieve the best possible surface finish within the chamber aperture. Improvements to our earlier fabrication methods allowed us to meet the critical surface roughness finish defined by RF impedance requirements. We were able to improve the surface finish from an average of 812 nm rms to 238 nm rms. The average longitudinal surface roughness slope of all chambers was to be less than 20 mrad. We achieved an average longitudinal surface roughness slope of 8.5 mrad with no chamber exceeding 20 mrad. In the end, sixty-four undulator vacuum chambers and alignment systems were delivered to SLAC for the LCLS-II Upgrade project. Here we will report on the process improvements for the fabrication of these chambers.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP068  
About • paper received ※ 16 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP069 Observations on Microbunching of Electrons in Laser-Driven Plasma Accelerators and Free-Electron Lasers FEL, laser, bunching, experiment 722
 
  • A.H. Lumpkin
    Fermilab, Batavia, Illinois, USA
  • M. Downer, M. LaBerge
    The University of Texas at Austin, Austin, Texas, USA
  • D.W. Rule
    Private Address, Silver Spring, USA
 
  Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics.
The periodic longitudinal density modulation of relativistic electrons at the resonant wavelength (microbunching) is a fundamental aspect of free-electron lasers (FELs). In one case, microbunching fractions reached 20% at saturation of a self-amplified spontaneous emission (SASE) FEL resulting in gains of 1 million at 530 nm [1]. In that experiment the z-dependent gain of coherent optical transition radiation (COTR) was also measured. In laser-driven plasma accelerators (LPAs), microbunching at visible wavelengths has also been recently reported as evidenced by significant COTR enhancements measured in near-field and far-field images on a single shot for the first time [2]. An analytical model for COTR interferometry (COTRI) addresses both cases. In the FEL, one identified microbunched transverse cores of 25-100 microns while in the LPA the reported transverse sizes at the exit of the LPA were a few microns. In the latter case, signal enhancements of nearly 100, 000 and extensive fringes out to 30 mrad in angle space were recorded. The broadband microbunching observed in the LPA case could act as a seed for a SASE FEL experiment with tunability in principle over the visible regime.
[1] A.H. Lumpkin et al., Phys. Rev. Lett. 88, No.23, 234801 (2002).
[2] A.H. Lumpkin, M. LaBerge, D.W. Rule et al., Proceedings of AAC18, (IEEE), (2019).
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP069  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP071 Progress in High Power High Brightness Double Bunch Self-Seeding at LCLS-II FEL, kicker, undulator, photon 726
 
  • A. Halavanau, F.-J. Decker, Y. Ding, C. Emma, Z. Huang, A.K. Krasnykh, J. Krzywiński, A.A. Lutman, G. Marcus, A. Marinelli, A. Ratti, D. Zhu
    SLAC, Menlo Park, California, USA
  • C. Pellegrini
    UCLA, Los Angeles, California, USA
 
  Funding: Work supported by the U.S. Department of Energy Contract No. DE-AC02-76SF00515.
We have previosuly shown that we can generate near TW, 15 fs duration, near transform limited X-ray pulses in the 4 to 8 keV photon energy range using the LCLS-II copper linac, two electron bunches, a 4-crystal monochromator/delay line and a fast transverse bunch kicker. The first bunch generates a strong seeding X-ray signal, and the second bunch, initially propagating off-axis, interacts with the seed in a tapered amplifier undulator, where it propagates on axis. In this paper, we investigate the design of the 4-crystal monochromator, acting also as an X-ray delay system, and of the fast kicker, in preparation of the implementation of the system in LCLS-II.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP071  
About • paper received ※ 20 August 2019       paper accepted ※ 26 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP073 Status Update for the High Gain High Efficiency TESSA-266 Experiment undulator, quadrupole, laser, experiment 730
 
  • Y. Park, D.K. Dang, P.E. Denham, P. Musumeci, N.S. Sudar
    UCLA, Los Angeles, USA
  • R.B. Agustsson, T.J. Campese, I.I. Gadjev, A.Y. Murokh
    RadiaBeam, Los Angeles, California, USA
  • C.C. Hall, S.D. Webb
    RadiaSoft LLC, Boulder, Colorado, USA
  • Y. Sun, A. Zholents
    ANL, Lemont, Illinois, USA
 
  Funding: DOE grant No. DE-SC0009914 and DE-SC0018559
Tapering Enhanced Stimulated Superradiant Amplification (TESSA) allows to increase the efficiency of Free Electron Laser (FEL) based radiation generation from ~0.1% to 10% by using intense seed laser pulses, strongly tapered undulators and prebunched electron beams [1]. Initial results validating this method have already been obtained at 10 µm wavelength at Brookhaven National Laboratory [2]. We will present the design of an experiment to demonstrate the TESSA scheme at high gain and shorter wavelength (266 nm) using the APS injector linac at Argonne National Labor-atory (ANL) to obtain conversion efficiency of up to 10%. Undulator and focusing lattice design, as well as beam dynamics and diagnostics for this experiment will be discussed. An extension of the experiment to include the possibility of multi-bunch linac operation and an optical cavity around the undulator to operate in the TESSO regime will also be presented [3].
[1] J. Duris et al., New J. Phys. 17 063036 (2015)
[2] N Sudar et al., Physical review letters, 117, 174801 (2016)
[3] J. Duris et al., Physical Review Accelerators and Beams 21, 080705 (2018)
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP073  
About • paper received ※ 20 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP074 FLASH: The Pioneering XUV and Soft X-Ray FEL User Facility FEL, laser, free-electron-laser, undulator 734
 
  • K. Honkavaara, S. Schreiber
    DESY, Hamburg, Germany
 
  FLASH, the free-electron laser (FEL) at DESY (Hamburg) started user operation in summer 2005. It delivers high peak and average brilliance XUV and soft X-ray FEL radiation to photon experiments. Nowadays, FLASH has a 1.25 GeV superconducting linac, and two undulator beamlines, which are operated simultaneously. This paper provides an overview of its evolution from a test facility for superconducting accelerator technology to a full-scale FEL user facility.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP074  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP078 Status of the CompactLight Design Study FEL, linac, undulator, gun 738
 
  • G. D’Auria, S. Di Mitri, R.A. Rochow
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • M. Aicheler
    HIP, University of Helsinki, Finland
  • A. Aksoy
    Ankara University Institute of Accelerator Technologies, Golbasi, Turkey
  • D. Alesini, M. Bellaveglia, B. Buonomo, F. Cardelli, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, L. Piersanti, J. Scifo, B. Spataro, C. Vaccarezza
    INFN/LNF, Frascati, Italy
  • R. Apsimon, G. Burt, A. Castilla
    Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
  • J.M. Arnesano, F. Bosco, L. Ficcadenti, A. Mostacci, L. Palumbo
    Sapienza University of Rome, Rome, Italy
  • A. Bernhard, J. Gethmann
    KIT, Karlsruhe, Germany
  • M. Calvi, T. Schmidt, K. Zhang
    PSI, Villigen PSI, Switzerland
  • H.M. Castañeda Cortés, J.A. Clarke, D.J. Dunning, N. Thompson
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
  • A.W. Cross, L. Zhang
    USTRAT/SUPA, Glasgow, United Kingdom
  • G. Dattoli, F. Nguyen, A. Petralia
    ENEA C.R. Frascati, Frascati (Roma), Italy
  • R.T. Dowd, D. Zhu
    AS - ANSTO, Clayton, Australia
  • D. Esperante Pereira, J. Fuster, D. Gonzalez-Iglesias
    IFIC, Valencia, Spain
  • W. Fang
    SINAP, Shanghai, People’s Republic of China
  • A. Faus-Golfe, Y. Han
    LAL, Orsay, France
  • E.N. Gazis, N. Gazis
    National Technical University of Athens, Athens, Greece
  • R. Geometrante, M. Kokole
    KYMA, Trieste, Italy
  • B. Gimeno
    UVEG, Burjasot (Valencia), Spain
  • V.A. Goryashko, M. Jacewicz, R.J.M.Y. Ruber
    Uppsala University, Uppsala, Sweden
  • R. Hoekstra
    ARCNL, Amsterdam, The Netherlands
  • X.J.A. Janssen, J.M.A. Priem
    VDL ETG, Eindhoven, The Netherlands
  • A. Latina, X. Liu, C. Rossi, D. Schulte, S. Stapnes, X.W. Wu, W. Wuensch
    CERN, Geneva, Switzerland
  • O.J. Luiten, P.H.A. Mutsaers, X.F.D. Stragier
    TUE, Eindhoven, The Netherlands
  • J. Marcos, E. Marín, R. Muñoz Horta, F. Pérez
    ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
  • Z. Nergiz
    Ankara University, Faculty of Sciences, Ankara, Turkey
  • L.J.R. Nix
    University of Strathclyde, Glasgow, United Kingdom
  • E. Tanke, E. Trachnas
    ESS, Lund, Sweden
  • G. Taylor
    The University of Melbourne, Melbourne, Victoria, Australia
 
  Funding: This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement No. 777431.
CompactLight (XLS) is an International Collaboration of 24 partners and 5 third parties, funded by the European Union through the Horizon 2020 Research and Innovation Programme. The main goal of the project, which started in January 2018 with a duration of 36 months, is the design of an hard X-ray FEL facility beyond today’s state of the art, using the latest concepts for bright electron photo-injectors, high-gradient accelerating structures, and innovative short-period undulators. The specifications of the facility and the parameters of the future FEL are driven by the demands of potential users and the associated science cases. In this paper we will give an overview on the ongoing activities and the major results achieved until now.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP078  
About • paper received ※ 19 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP079 Status and Perspectives of the FERMI FEL Facility (2019) FEL, laser, linac, free-electron-laser 742
 
  • L. Giannessi, E. Allaria, L. Badano, S. Bassanese, F. Bencivenga, C. Callegari, F. Capotondi, D. Castronovo, F. Cilento, P. Cinquegrana, M. Coreno, I. Cudin, G. D’Auria, M.B. Danailov, R. De Monte, G. De Ninno, P. Delgiusto, A.A. Demidovich, M. Di Fraia, S. Di Mitri, B. Diviacco, A. Fabris, R. Fabris, W.M. Fawley, M. Ferianis, L. Foglia, P. Furlan Radivo, G. Gaio, F. Gelmetti, F. Iazzourene, S. Krecic, G. Kurdi, M. Lonza, N. Mahne, M. Malvestuto, M. Manfredda, C. Masciovecchio, M. Milloch, R. Mincigrucci, N.S. Mirian, I. Nikolov, F.H. O’Shea, G. Penco, A. Perucchi, O. Plekan, M. Predonzani, K.C. Prince, E. Principi, L. Raimondi, P. Rebernik Ribič, F. Rossi, L. Rumiz, C. Scafuri, C. Serpico, N. Shafqat, P. Sigalotti, A. Simoncig, S. Spampinati, C. Spezzani, M. Svandrlik, M. Trovò, A. Vascotto, M. Veronese, R. Visintini, D. Zangrando, M. Zangrando
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
 
  FERMI is the seeded Free Electron Laser (FEL) user facility at the Elettra laboratory in Trieste, operating in the VUV to EUV and soft X-rays spectral range; the radiation produced by the seeded FEL is characterized by wavelength stability, low temporal jitter and longitudinal coherence in the range 100-4 nm. During 2018 a dedicated experiment has shown the potential of the Echo Enabled Harmonic Generation (EEHG) scheme [1] to cover most of this spectral range with a single stage cascade [2]. Such a scheme, combined to an increment of the beam energy and of the accelerator performances, could extend the FERMI operating range toward the oxygen k-edge. With this perspective, we present the development plans under consideration for the next 3 to 5 years. These include an upgrade of the linac and of the existing FEL lines, consisting in the conversion of FEL-1 first, and FEL-2 successively, into EEHG seeded FELs.
[1] G. Stupakov, Phys. Rev. Lett. 102, 74801 (2009)
[2] P. Rebernik et al., Nature Photonics https://doi.org/10.1038/s41566-019-0427-1
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP079  
About • paper received ※ 28 August 2019       paper accepted ※ 29 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP081 PolFEL — New Facility in Poland FEL, radiation, photon, experiment 746
 
  • K. Szamota-Leandersson, P.J. Czuma, P. Krawczyk, J. Krzywiński, R. Nietubyć, M. Staszczak, J. Szewiński
    NCBJ, Świerk/Otwock, Poland
  • W. Bal, J. Poznański
    IBB, Warsaw, Poland
  • A. Bartnik, H. Fiedorowicz, K. Janulewicz, N. Palka
    MUT, Warsaw, Poland
  • J.K. Sekutowicz
    DESY, Hamburg, Germany
 
  Funding: European Regional Development Fund ’ Smart Growth
In 2018 funds for the free electron laser PolFEL project was received. PolFEL will be driven by cw operating superconducting linac with SRF electron source. PolFEL will generate THz, IR and VIS-VUV radiation in two beamlines, respectively. In the first one, with electron beam below 80 MeV, the THz/IR radiation source will be generated in permanent magnet supper-radiant undulator, delivering THz radiation in 0.5 to 6 THz range. In the second beam line with up to 180 MeV electrons, the VIS/VUV radiation will be generated in the SASE undulator delivering coherent radiation down to 55 nm wavelength in the third harmonic, with sub-100 fs pulse duration. At the moment, four end-stations are planned. Experiments will be equipped with dedicated Pump-Probe spectrometer system as well. In the project, also, the Inverse Compton Scattering experiment is planned. In this contribution we will describe PolFEL facility in more details.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP081  
About • paper received ※ 29 August 2019       paper accepted ※ 18 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP086 Operation Modes of the SwissFEL Soft X-Ray Beamline Athos undulator, laser, FEL, free-electron-laser 757
 
  • S. Reiche, E. Ferrari, E. Prat, T. Schietinger
    PSI, Villigen PSI, Switzerland
 
  SwissFEL drives the two FEL beamlines Aramis and Athos, a hard and soft X-ray FEL, respectively. The layout of Athos extends from a simple SASE FEL beamline with the addition of delaying chicanes, external seeding and beam manipulation with wakefield sources (dechirper). It reserves also the space for a possible upgrade to self-seeding. This presentation gives an overview on the detailed layout enabling the unique operation modes of the Athos facility.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-THP086  
About • paper received ※ 23 August 2019       paper accepted ※ 16 September 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
FRA01 FEL Operation at the European XFEL Facility FEL, operation, photon, kicker 766
 
  • D. Nölle
    DESY, Hamburg, Germany
 
  The European XFEL is a SASE FEL based user facility in the metropole region of Hamburg providing hard and soft X-ray photons with extremely high brilliance. The three FEL lines are operated simultaneously and are powered by a superconducting LINAC based on TESLA technology. Average power levels of up to several W have been demonstrated as well for soft and hard X-rays and can be requested by user experiments on day by day basis. The contribution will report on the results of the commissioning within the last two years as well as on the transition to user operation. Typical operation conditions for parallel operation of 3 SASE lines will be discussed. The perspective for the operation with an extended photon energy range, as well as for full power operation with up to 27000 pulses per second will be presented.  
slides icon Slides FRA01 [27.196 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-FRA01  
About • paper received ※ 20 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
FRA02 LCLS-II - Status and Upgrades linac, undulator, operation, photon 772
 
  • A. Brachmann, M. Dunham, J.F. Schmerge
    SLAC, Menlo Park, California, USA
 
  Funding: This work is supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-76SF00515.
The LCLS-II FEL is under construction at the SLAC National Accelerator Laboratory. This facility is based on a superconducting accelerator, providing a cw e- beam of 4 GeV at ~1 MHz. This beam drives two variable gap undulator (VGU) beam lines to generate photons in the soft and hard X-ray regime. High repetition rate photon beams will be available up to ~5 keV. The normal conducting accelerator will remain in operation, delivering milli-joule pulses up to ~20 keV for LCLS science. We anticipate to start the LCLS user program in the spring of 2020 using the new undulator systems. Superconducting accelerator operation will start in 2021 and will achieve full design-performance over the course of several years. Approximately a quarter of the superconducting accelerator is installed now and the associated cryoplant construction is near completion. The VGU systems will be installed and ready for beam delivery in early 2020. We will report on the project status, commissioning and ramp-up plans to achieve design performance and discuss plans to take advantage of the new facilities potential including our longer term strategy to extend the capability of SLAC’s LCLS FEL facility.
 
slides icon Slides FRA02 [24.207 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-FRA02  
About • paper received ※ 04 August 2019       paper accepted ※ 27 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
FRA03 FLASH - Status and Upgrades laser, FEL, undulator, free-electron-laser 776
 
  • J. Rönsch-Schulenburg, K. Honkavaara, S. Schreiber, R. Treusch, M. Vogt
    DESY, Hamburg, Germany
 
  FLASH, the Free-Electron Laser at DESY in Hamburg was the first FEL user facility in the XUV and soft X-ray range. The superconducting RF technology allows to produce several thousand SASE pulses per second with a high peak and average brilliance. It developed to a user facility with a 1.25 GeV linear accelerator, two undulator beamlines running in parallel, and a third electron beamline containing the FLASHForward plasma wakefield experiment. Actual user operation and FEL research are discussed. New concepts and a redesign of the facility are developed to ensure that also in future FLASH will allow cutting-edge research. Upgrade plans are discussed in the contribution.  
slides icon Slides FRA03 [10.554 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-FRA03  
About • paper received ※ 20 August 2019       paper accepted ※ 28 August 2019       issue date ※ 05 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)